WELCOME TO : Fire Engineering Technology

SYSTEM OPERATION The main features of the system are:
Automatic Detection of Fire.
Automatic flooding of carbon dioxide.
Activation of Audio-visual Alarm unit.
Manual Release valve. The detection of fire is primarily made by FIREDETEC TUBE, which can detect fire anywhere along its length. The tube is highly flexible and can be conveniently routed to cover the various hazard areas in electrical panels. The FIREDETEC Tube is a fixed temperature sensing tube made up of high tech polymer material to cater to long term leak resistance, flexibility, accurate and consistent heat sensitivity. One end of the FireDeTec Tube is connected to the Co2 Cylinder and the other end to an End of Line Adapter through a Non return valve. The Co2 Cylinder Assy is mounted on a Weight Monitoring System. A Pressure Switch is connected to the End of Line Adapter, which is electrically connected to an audio-visual Alarm Unit. In the event of fire contacting the FireDeTec Tube, the Tube starts melting and bursts at the hottest point. This leads to a rapid reduction of pressure in side the tubing. This will make the Differential High Pressure Valve fitted on the Co2 cylinder open instantaneously and the Co2 gas stored in the cylinder will get released through the Tube at the burst point into the panel. The drop of pressure in the Tube followed by reduction in the weight of the Co2 in cylinder due to the discharge will activate an audio-visual Alarm.
FireDeTec Tube
Carbon Dioxide Cylinder Assembly.
Manual Release Valve.
Pressure Switch
Audio-visual Alarm Unit.
Weight Monitoring System. FIREDETEC TUBE : CARBON DIOXIDE CYLINDER ASSEMBLY: SYSTEM CONFIGURATION: A self-activating Differential High Pressure Valve is fitted to the Co Cylinder through which the Tube is connected. The valve contains a pressure regulator, which maintains Co2 pressure in the FireDeTec 15 bars. The Co2 Cylinder Assy is fitted in Weight Monitoring System. In the event of a fire, the Tube bursts open at the hottest spot letting out the pressure in the FireDeTec Tube. The differential pressure arising of this activates the plunger inside the valve and the Co gas gets released from the out let port through the burst point. The FireDeTec Tube is a flexible detection and delivery device installed within the protected equipment. The FireDeTec does not rely on detecting fire at a single point but at anywhere along its length. Co2 FireDeTec tube to FireDeTec Co2 Tube WEIGHT MONITORING SYSTEM: This unit enables on line monitoring of th inside the FireDeTec tube. It consists of a load cell with Electronic Control Unit and a Cylindrical ring for holding the CO of CO2 Cylinder and discharge of gas in the CO2 gas), beyond a pre-set limit (2Kg in the present case & below 8 bar in case of pressure inside the Tube), it activates the Audio Caution: Do not tamper with the Contro Adjustments inside. The same will have to be serviced only by Qualified factory trained personnel. MANUAL RELEASE VALVE: The Manual release Valve is intended for activation of the Co of a BallValve actuator mechanism. To operate the System, pull out the locking pin and turn the knob to “ON position. This will activate the system instantaneously. NOTE : - Leave Knob in “ON position till Co Caution: Operation of the Manual Release Valve will discharge the Co instantaneously. Also breakage of the seal voids warranty. PRESSURE SWITCH: the weight of CO2 gas in the Cylinder and pressure CO2 Cylinder in place. In the event of reduction in the weight scharge FireDeTec Tube (due to Leakage or Release of - Visual Alarm. Control Unit as the same contains sensitive Circuitry / Co2 System manually. It c Co2 from the Cylinder is discharged c Co2 from the cylinders The Pressure Switch monitors the pressure inside the FireDeTec Tube. It is connected to the FireDeTec Tube through an End of Line Adapter. The Pressure Switch operates at a preset pressure of 5 to 8 bar. In the event of a reduction in pressure, the pressure switch opens and activates the Audio - Visual Alarm unit. l consists completely. e AUDIO - VISUAL ALARM: STRAIGHT FITTING: TEE FITTING: CABLE: Cables are used for inter connection of the Control Unit of Weight Monitoring System to the Audio-visual Alarm Unit and Master Alarm Unit. This is used as a three Fitting is made up of forged Brass with nickel plating. The ends of the fitting are flared to exactly f lock is provided to ensure proper fitment of the FireDeTec Audio-Visual Alarm is located at various zones to alert people around regarding the activation of Co2 flooding System. The alarm unit is ruggedly built to cater to the adverse environmental conditions This is used to join the FireDeTec Straight Fitting is made up of forged Brass with nickel plating. The ends of the fitting are flared to exactly fit the FireDeTec Tube. A G 1/8 thread lock is provided to ensure proper fitment of the FireDeTec Tube. three-way distributor. Tee fit the FireDeTec Tube. A G 1/8 thread Tube. Tube. ting SYSTEM FEATURES: The following are the features of the FIREDETEC Automatic Fire Protection System.
Simple self-activating system without human intervention.
Linear Heat Detection - senses fire anywhere along the entire length of the FireDeTec Tube.
Extinguishes fire at an early stage.
System activates automatically and also manually.
Safe against malfunction.
Easy to maintain because of simple construction.

Smoke Detector, Beam Detector, Flame Detector and all type detectors.

Fire Extinguishers All Types 1. CO2 Type 2. ABC Type 3. DCP Type 4. Water Mist Type

Automatic CO2 Type fire detection and suppression system.

ABC Type All Capacity