WELCOME TO : Shenzhen GL-COM Technology Co., Ltd.

E8010U-B type ONU products fully comply with IEEE 802.3-2005 and the China Telecom EPON device technical specification (V2.1). It is operative, manageable and maintainable at telecommunication level, and can provide high speed data service for customers. It has a PON uplink port that connects to office end apparatus through optical fiber. Product features:  Conform to IEEE802.3ah standard  Support Ethernet service layer 2 switching and wire-speed forwarding of uplink and downlink services  Support frame filtering and suppression  Support standard 802.1Q Vlan function, support VLAN conversion  Support 4094 VLANs (802.1Q)  Support Dynamic Bandwidth Allocation (DBA) function  Support QoS, including traffic flow classification, priority marking, queue and dispatch, traffic shaping and traffic control, etc  Single ONU supports up to 1 LLID.  Support IGMP Snooping  Support Ethernet port rate limit loop detection  Support power failure alarm  Support lightning protection for power supply and lightning protection for service port Port features:  1 PON ports (1.25G)  1 10/100/1000M port Physical features:  Power supply: 12VDC  Power consumption: 6W  Temperature: Working temperature:0¡«55¡æ Storage temperature: -30¡«60¡æ Relative humidity: 10¡«90% (non-condensing)

EOC11T coaxial cable terminal (outdoor type) adopts Qualcomm Atheros 7410 chip scheme. It is an EOC (Ethernet over Coax) Master with the access function of CATV (cable television) and wide band data. EOC11T can implement hybrid output of IP data signal and CATV signal toward cable television distribution network in order to realize co-cable transmission of radio and television programs and IP data. EOC11T is in the EOC head-EOC master and under-connects more 253 EOC slave coaxial cable network unit equipments. This device can be installed in ONU (Optical Network Unit) cable output line of HFC (Hybrid Fiber-Coaxial) CATV network or input line of user distribution network in one building. It provides the users with services of voice, video, data and so on.

E8010U-N type ONU products fully comply with IEEE 802.3ah. It is operative, manageable and maintainable at telecommunication level, and can provide high speed data service for customers. It has a PON uplink port that connects to office end apparatus through optical fiber. Product features:  Conform to IEEE802.3ah standard  Support Ethernet service layer 2 switching and wire-speed forwarding of uplink and downlink services  Support frame filtering and suppression  Support standard 802.1Q Vlan function, support VLAN conversion  Support 4094 VLANs (802.1Q)  Support Dynamic Bandwidth Allocation (DBA) function  Support QoS, including traffic flow classification, priority marking, queue and dispatch, traffic shaping and traffic control, etc  Single ONU supports up to 8 LLID.  Support IGMP Snooping  Support Ethernet port ratelimit loop detection  Support power failure alarm  Support lightning protection for power supply and lightning protection for service port Port features:  PON ports (1.25G)  1 10/100/1000M port  1 10/100M port  Physical features:  Power supply: 12VDC  Power consumption: 6W  Temperature: Working temperature:0¡«55¡æ Storage temperature: -30¡«60¡æ Relative humidity: 10¡«90% (non-condensing)

E8080U£¨1GE+3FE+2POTS+WIFI£©is an EPON user terminal, which meets the SOHO broadband access ,FTTH broadband speed ,FFTH/FTTD of cable-television operator. The equipment based on mature, stable, cost-effective Gigabit EPON technology combines Gigabit Ethernet switching technology, WIFI and high-quality VoIP technology. It has high reliability, ease of administration and good QOS. The technology performance meets the IEEE802.3ah, China Telecom EPON equipment technical requirements (V2.1) specification requirements. 1¡¢Special Features 1.1¡¢Data service function  Full speed without blocking exchange  8K MAC address table  Support Full Range VLAN ID  Support QinQ VLAN¡¢1:1VLAN¡¢VLAN Trunk etc.  Support port monitor, port mirror, port speed limit, port SLA etc.  QoS based on interface,IEEE 802.1p,IPV4(ToS),Diff-Serv,IPV6,802.1Q VLANID,destination MAC or source MAC.  The Ethernet interfaces according to the specifications of the IEEE802.3.  128-bit AES encryption algorithm.  According to 802.1x remote management and user authentication 1.2¡¢Telephone service function  Support SIP protocol£¬H.248 protocol£¬H.323 optional.  Support ITU-T G.711¡¢G.723.1¡¢G.729 compression algorithm  Echo cancellation meets ITU-T G.168-2002. echo cancellation for the longest is 128ms.  Support OSPF,T38.  Support RFC2833 and RFC2833 redundant,distinctive ringing ,MD5 certificate,call forwarding,call waiting,telephone hotline,alarm clock,abbreviated dialing and etc.  Support two POTS interface three-way calling,three-way calling support local mixing.  Support POTS GR909 line test function.  Support dynamic PPPoE,dhcp and static IP.  Support CTC2.1 standard  7¡Á24h call lose¡Ü0.01%

Optical network Master integrate the CATV, EOC and EPON transmission technology together in one device. Using of unified network management. Through the network data port to monitor or control the CATV optical receiver output Electricity level and EOC modulation amplitude, and set up the EOC terminal data port capabilities. ¡¡¡¡The unit of the ONU in the EPON network can provide high-speed data. CATV optical receiver provides 1000MHz downlink RF channel. EOC Master can modulated High-speed data signal onto the RF low-frequency channel, with CATV signal combined with each other, formed a set of high-speed data, video, voice, three player in one bearer network to meet the two-way transformation of the broadcasting digital TV.