WELCOME TO : CAN GAS SYSTEMS COMPANY LIMITED

CANGAS? Mobile Nitrogen Generator is mainly for portable & moving purpose, and specially used in oil field, airport, etc, where nitrogen source is far away from consumers end. The system is consisted of air compressor, refregeneration dryer, nitrogen generator, all in one container. If reuqired, the nitrogen can be compressed into cylinders and be distributed to users process CANGAS has many references in such applications for customers from different industries. Features: *containerized& Packaged Easy transportation, installation. *Designed for extreme ambient conditions with extremely cold or hot temperature. *Automatic operation, DCS communication available. *Both electrical and diesel power are available. *Customize the system to meet the customer’s special requirements.http://www.cangas-systems.com

Cryogenic air separation is a traditional method to separate nitrogen and oxygen from air. Through air compressor/cooler and purification system, compressed air is cooled and water/impurities are removed from it. With expander supplying coolant nitrogen and oxygen are separated by fractionating method in fraction tower. Both gaseous and liquid gases are available as per users’ requirements.http://www.cangas-systems.com

Diaphragm oxygen & nitrogen compressor is a kind of displacement compressors driven by electromotor. The main characteristic of diaphragm compressor is that there are two chambers in each compressor head: a hydraulic oil chamber and a gas chamber. When the machine is started, the electromotor drives crankshaft making rotational movements. The crankshaft is connected with a piston by a connecting rod, which can transform the rotational movement of crankshaft into the reciprocating movement of piston. When the piston is pulled to the down end, the hydraulic oil will flow back to the oil cylinder. The pressure differential will make the diaphragms have a downward elastic deformation. The volume of gas chamber will be enlarged. The gas suction valve will open automatically. In this way, the gas is sucked in. When the con-rod pushes the piston moving to the top end, the piston will further push the hydraulic oil to make the diaphragms have an upward elastic deformation. The volume of gas chamber will be reduced and the gas can be compressed. The gas discharge valve will open automatically when the gas pressure is up to a certain value. In a word, as a result of the diaphragms periodical elastic deformation, the gas is automatically sucked, compressed and discharged periodically.http://www.cangas-systems.com

Oil-free air compressor is reciprocating piston type, single action, air or water cooled portable compressor. It is designed for applications where need clean and high quality compressed air. All pairs of frication of the compressors and boosters are non-lubricated; the discharged compressed air does not contain oil and oil vapor. This units are not only specially suitable for applications where need high quality compressed air, such as chemical, pharmacy, food, electronic instrument, traffic, telecommunication, light industry, textile, scientific research and so on, but also suitable for other applications which need common air resource as power.http://www.cangas-systems.com

Cryogenic air separation plant is a traditional method to separate nitrogen and oxygen from air. Through air compressor/cooler and purification system, compressed air is cooled and water/impurities are removed from it. With expander supplying coolant nitrogen and oxygen are separated by fractionating method in fraction tower. Both gaseous and liquid gases are available as per users’ requirements.http://www.cangas-systems.com