Products / Services : Sino-welding Automatic Technological (WUXI)CO.,LTD

Matching with flux hopper LT-AP50 and small hopper LT-AP10, this is the indispensable auxiliary equipment of large scale professional welding machines, such as, welding machine of membrance wall, spiraling tube welding machine, gantry welding machine and so on. Beautiful appearance, scientific and reasonable structure, advanced technology, and it's safe reliable and easy to operate. Driven by AC motor, controlled by negative pressure wind pump, filtered by filter bag. During the process of recovery, automatic departure between the dust particles and flux, moreover, it has no environmental pollution.

This is an integrated equipment for flux recovery and transportation. It is applicable for welding manipulator and all kinds of difficult cross-submerged arc welding equipment. It adopts imported fans to make recovery; it connects with external pressure plastic gas source (0.6Mpa) to feeding; it has level detection, the upper and lower double-valve switching, high-density film filter dust and according to the different needs of welding to replace with different fluxes. The whole action is controlled by the PLC, it will make automatic completion of the recycling flux and can also control recovery, conveying and cutting by an external wired remote control. The effective flux recovery rate is of 95%. We can add drying insulation system according to the demands (silica gel or electric heating). It is applicable in damp ocean engineering. The device saves time and materials, save efforts, efficient and environmental protection; it can be widely used in recovery and transmission of welding flux in domestic nuclear power, wind power, boiler, pipe and other cylinders. It can realize the recovery of flux in the smallest cylinder of 300MM.

The machine integrates recovery,conveying,dust,magnetic separation,drying in a body,the transmission distance is of 30 meters.It has characteristics of large capacity,small noise, good dust and air purifying effects.It can be applied to large ship panel,spiral ateel pipe,difficult SAW,H beam welding flux recovery.

It is applicable to large and medium steel mills single roller welding and spiral welding.It integrates recovery,magnetic separation,screening,feeding,dust handling and drying in one device.It is equipped with a level control system,heating temperature can be set on request.