Products / Services : Zhongshan Shili Wire Winder Equipment Co.,Ltd.

Function and feature： a.Winding uses stepping motor, potentiometer control, variable speed, high speed. b.With automatic reset function,easy to measure the winder start and stop point. c.It can stop layer and winding layer as you like, two side ends of parking, easy to operate. Application range： Small transformers, relays, power coil, communications coil , others coil.

Machine Feature： This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on.The machine uses two axes synchronous design conform to customers around the relatively thick wire, design the machine follow the high wire requirements a(with the cable and lower cable in two models) Function and feature： a.Using the latest synchronization with the coupling cable controller. b.With self detection, including setting error, speed tracking and velocity calibration Optional lifting speed of main spindle c. With ruler function can be easily measured width and start point. d.Start moving speed of the spindle motor to climb time to decide   Application range： EE transformer,EI transformer,Stepping motor,Relay,coil class,auto ABS,Switch power transformer and special products.

① Unique winding fixture design, dress up fast. ② Using a touch screen interface, easy to set parameters. ③ With twisted features. ④ Installation of disconnection detection devices. ⑤ Easy operation, easy maintenance.

Machine function and feature： The machine use Taiwan PLC, AC servo motor, all Chinese and English touch screen control.All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of and so on.It will make the machine high speed, the pointing accuracy of accurate, so that customer in the use of the process to truly experience the effect time of high production. 1.Automatic winding, automatic passed slots, wrapped commutator angle, and automatically cut the wire. 2.Can improve production , reduce wire losses. Improve product quality. Application range： All kinds of Motor rotor high-quality wound around the outside.

Machine Feature： This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on.The machine uses two axes synchronous design conform to customers around the relatively thick wire, design the machine follow the high wire requirements a(with the cable and lower cable in two models) Function and feature： a.Using the latest synchronization with the coupling cable controller. b.With self detection, including setting error, speed tracking and velocity calibration Optional lifting speed of main spindle c. With ruler function can be easily measured width and start point. d.Start moving speed of the spindle motor to climb time to decide   Application range： EE transformer,EI transformer,Stepping motor,Relay,coil class,auto ABS,Switch power transformer and special products.

Machine Feature: This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on. Function and feature： a.Using the latest synchronization with the coupling cable controller. b.With self detection, including setting error, speed tracking and velocity calibration. c.Optional lifting speed of main spindle. d.Start moving speed of the spindle motor to climb time to decide. Application range： EE transformer,EI transformer,Stepping motor,Relay,coil class,auto ABS,Switch power transformer and special products. Specifications： Spindle number 6 Wire size range 0.05-0.45mm Loop diameter 70mm The max wire spacing 9.99mm Winder width 60mm Spindle pitch 85mm Max speed 0-7000turn/min Input power 220V  50HZ/60HZ Spindle motor Phase motor+AC Drives Winder motor Stepping motor Machine size 920×780×950mm Package size 990×740×1010mm Net weight 120kg Gross weight 150kg

Machine Feature: This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on. The machine use four spindle synchronous design, with full body cast, high speed, low noise, small size, is the preferred product assembly line. Function and feature： a.Using the latest synchronization with the coupling cable controller. b.With self detection, including setting error, speed tracking and velocity calibration c.Optional lifting speed of main spindle. d.c. with ruler function can be easily measured width and Kai Winding around the point. e.Start moving speed of the spindle motor to climb time to decide by yourself. Application range： EE transformer,EI transformer,Stepping motor,Relay,coil class,auto ABS,Switch power transformer and special products.

Machine Feature： Self-reset function, it easily to set the start and stop point through the measured. Every layer start or stop control by yourself.Two side can set stop and so on. Application range： EE transformer,EI transformer,Stepping motor,Relay,coil class,auto ABS,Switch power transformer and special products.

SRA22-8 Motor Coil Winding Machine Machine Feature: This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，AC Drivers of Taiwan,and so on. Change the fixture has two choice, with pneumatic or manual. The machine can be used for multi connected, coil automatic wire winding of multilayer type , it can winding 1-8 wire at one time.can also be pass the groove automatically . Can winding 1-32 coils in the winder length range. There are two alternate use of the square shaft rotatable about the coil diameter 25MM-180MM, high production efficiency. For the characteristics of the machine winding ,the machine body use thick cast iron , The vibration and noise of smaller machines, it also have when wire cutting the machine will stop function, not discarded products. Main configuration: ① Row of thread with eight branch head, the winding head length and elevation can be easily adjusted. ② Equipped with mobile wire frame (including eight group bobbin and eight spools ,size is 120MM × 300MM diameter ). ③ With two square shaft ,size is 16 × 16 × 630MM . ④ Supply frame size is 800 × 800 × 780MM. Application range： Can winding a variety of motor coil groups, including industrial motors, air conditioner motors, washing machine motors, fan motors. Specifications Spindle number 1shaft 8 groups Wire size range 0.1-0.6mm Loop diameter 260mm Max wire distance 9.99mm Winder width 180mm Max speed 4000 turn/min Input power 220V  50HZ/60HZ Spindle motor Phase motor AC Drive Winder motor Stepping motor Machine size 1320×900×1320mm Package size 1370×1420×1300mm N/G weight 200kg/240kg

Machine Feature: This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on. Function and feature： The machine body use thick cast iron , low noise ,even can do more automated multi-layer coil winding, it can winding 1-4 coils in one time, also can be switched automatically and continuously, but with a strong moving top tail and a special winding device, so that the coil smoothly, beautiful. Combining the two sets of mold used alternately, the work efficiency can be improved exponentially. Application range： Microwave transformers, ballasts, industrial motor and so on.

Machine Feature: The machine use 16 control chip, data setting is simple, high quality steel desktop design, operation more convenient.Coil set many section，it’s using manual winding technology, the winding quality can follow one’s bent. Application range： Suitable for small transformers, relays, power converters, communications coil meter coils，fans of the stator coils. Specifications： Spindle number 1 Speed H 3800RPM    L 1500RPM Wire size range 0.06-1.2mm Loop diamete 200mm Winder width Hand row Input power 220V  50HZ Input power AC120W Machine Size 430×300×400mm Package size 450×560×310mm Net weight 37kg Gross weight 45kg

Machine Feature: This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on. Function and feature： a.Using the latest synchronization with the coupling cable controller. b.With self detection, including setting error, speed tracking and velocity calibration. c.Optional lifting speed of main spindle. d.Start moving speed of the spindle motor to climb time to decide   Application range： EE transformer,EI transformer,Stepping motor,Relay,coil class,auto ABS,Switch power transformer and special products. Specifications： Spindle number 6 Wire size range 0.05-0.45mm Loop diameter 70mm The max wire spacing 9.99mm Winder width 60mm Spindle pitch 85mm Max speed 0-5200turn/min Spindle motor phase motor+AC Drives Winder motor Stepping motor Input power 220V  50HZ/60HZ Machine size 930×510×480mm Package size 460×650×1040mm Net weight 65kg Gross weight 85kg

Features: This machine manufacture lightweight, easy to use, suitable for all types of EI or EE transformer and relay coil and so on.

Machine Feature： The machine use mechanical transmission, pneumatic system, by the proximity switch control cylinder, complete the platen, paper feeding, cutting, molding, insert functions and so on. Application Range: Suitable for a variety of minicomputer stator slot insulation paper insertion .

Machine Feature: The machine uses 16 control chip, parameter setting is simple, high quality steel desktop design, operation more convenient.High efficiency, automatic stop, fast braking. Application range： EE transformer,EI transformer,Stepping motor,Relay,coil class,auto ABS,Switch power transformer and special products.

Machine Feature: This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，AC Drivers of Taiwan,and so on. The machine use two spindle synchronous design, selection of high-power phase motor, making a thick wire around the low-speed torque when larger and more stable. Coupled with high-power stepper motor ,when it rotates will get higher accuracy, so that customers to feel save time,save worker,high production. Application range: This machine suitable for all kinds of motor stator winding, such as: a variety of ceiling fan stator, pole number stator, locomotives generators. Specifications： Spindle number 2 Wire size range 0.1-1.2mm Loop diameter 200mm Max wire distance 9.99mm Winder width 100mm Max speed 2200turn/min Input power 220V  50HZ/60HZ Spindle motor Phase motor+AC Driver Winder motor Stepping motor Machine size 720×950×1300mm Package size 860×1400×1320mm Net weight 180kg Gross weight 220kg

Machine Feature: This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on..Strong lampstand, using the side of spindle winding, powerful tail stock support, with thick wire winding structure , super torque output, can easily finish the big transformer winding. Application range： Various types of transformers and various wire thick wire coils. Specifications Wire size range 0.3-2.5mm Winder width 200mm The max wire spacing 9.99mm Maximum speed 0-2200turns/min Loop diameter 240mm Spindle motor Phase motor+AC Drives Winder motor Stepping motor Input power 220V  50HZ/60HZ Machine Size 1000×520×430mm Package size 1130×580×550mm Net weight 98kg Gross weight 118kg

Machine Feature: This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products.All the parts for this machine are imported ,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on. The machine uses four-axis synchronous design, machine body all use cast iron, high speed, low noise, small size, is the preferred product assembly line. Application Range： Mica sheet, heating wire, coil resistance and all the extended coil products.

Machine Feature: This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on. Function and feature： a.Using the latest synchronization with the coupling cable controller. b.With self detection, including setting error, speed tracking and velocity calibration. c. Optional lifting speed of main spindle. d.Start moving speed of the spindle motor to climb time to decide.   Application range： EE transformer,EI transformer,Stepping motor,Relay,coil class,auto ABS,Switch power transformer and special products.

Machine Feature: This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on. Function and feature： ★ The machine is design for the resistance client ,it both has winding corrugated wire and common wire function ★ Use stepping motor with ball screw, tail stock using strong tail top and spindle synchronization, make the machine is more stable and reliable. ★ Pressure corrugated motor and main motor are using AC Drivers motor to control . ★ Pressure corrugations wire and winding is running at the same time. Application range： Elevator resistance distribution phase resistance and various large-scale resistance.

Function and feature：  The high quality low price EI stacking machine, easy to operation, durable, is the ideal equipment for transformer production. Model  Lamination size Machine size  Package size N/G weight   A B EI28 28 23 410×170×300mm 410×170×300mm 13kg/19kg EI35 35 29.5 440×130×290mm 550×240×330mm 15kg/21kg EI41 41 33 440×130×290mm 550×240×330mm 15kg/21kg EI48 48 40 480×140×290mm 550×240×330mm 15kg/21kg EI57 57 47.5 540×150×290mm 630×260×380mm 15kg/22kg EI60 60 50 650×125×350mm 680×155×380mm 16kg/23kg EI66 66 55 560×160×340mm 630×260×380mm 17kg/25kg EI76 76 63.5 600×170×360mm 840×330×440mm 28kg/38kg EI86 86 71 700×180×380mm 840×260×400mm 34kg/43kg EI96 96 80 810×190×380mm 840×260×400mm 37kg/47kg EI105 105 87.5 870×175×380mm 900×205×410mm 42kg/52kg EI114 114 95 870×205×280mm 920×280×410mm 46kg/58kg EI133 133 111 950×270×370mm 1000×320×420mm 47.5kg

Features: This machine manufacture lightweight, easy to use, suitable for all types of EI or EE transformer and relay coil and so on.

Function and feature： This machine suitable for all kinds of brushless motor stator winding insulation paper product insert.

Machine Feature： SLB29-2 tapping machine is the best choice for transformer industry . This machine use 16 SCM programming and Taiwan variable speed motor, it will be high precision and easy to operate . This machine also use Japan NSK Bearings which is long service life and makes less noise.Machine is two spindle synchronous design, the production will be higher than other industry about more than one times . Customers in the course really experience appreciate the time-saving,worker-saving and high production. Main function: 1.Puts the material manual. 2.Tapping adhesive automatically. 3.Cuts the belt automatically. 4.Rejected material automatic.

Features: This machine manufacture lightweight, easy to use, suitable for all types of EI or EE transformer and relay coil and so on.

Machine function and feature： The machine use the newest control system，Taiwan PLC AC servo motors， Japan cylinder (SMC), Japan bearings (NTN)，Bando belt of Japan，Ball screw of Taiwan(TBI)，AC Drivers of Taiwan,and so on.The machine is stable and reliable, accurate positioning, both English Chinese touchscreen. The interface is clear and easy operation,also combine winding and tapping.Let the customer feeling save time,save worker and high production during winding. 1. Unique winding fixture design, dress up fast 2. You can set 0-180 Degree winding angles, can finish many angles winding in one time. 3. Precision tension wire frame control, product will be better quality and more secure. 4. With automatic cable management features, gripper without leaving I line 5. Optional automatic feeding device , improve the production efficiency. Application range： Cell phone charger transformer, watch coils, lighting high-frequency transformers, solenoids, EE transformer,EI transformer,Stepping motor,Relay,coil class,auto ABS,Switch power transformer and special products.

Machine Feature： The machine all use imported parts,such as: Japan Sanyo high-power servo motor , Japan Bando belts, Japan bearings (TNT), Japan cylinder (SMC), Taiwan (TBI) ball screw and guide rail.The movement of high precision,high stability of the whole machine,and high production. a.Unique winding fixture design, dress up fast. b.Can be set to 0 Degree or 90 Degree angle wrapped wire. Can finish the two angles at one time. c.Precision tension wire frame control, quality and more secure. d.With a dynamic clamp function, the gripper does not stay more than lines. e.Use windows interface, a simple high-level language instruction, convenient programming. f.Password storage function, to prevent non-related personnel to modify the program. g.With automatic loading and unloading functions, increase production. h.Have twisted features. i.Installation of disconnection detection device. Easy operation, easy maintenance.

Machine Feature： The machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on. MCSH26-80 is high production machine in transformer industry.Using a new combined type , both can winding thick wire and thin wire , only to moving the window ,it can finish all the work during winding in this machine., it operation saves time than the original machine , it can be one machine in two using, saving time and high production. (The machine can according to user requirements change in AB or BB to AA type) Function: a.Using the LCD latest synchronization with the coupling cable controller. b.With self detection, including setting error, speed tracking and velocity calibration Optional lifting speed of main spindle c.Start moving speed of the spindle motor to climb time to decide   Specifications: Spindle number 8 Wire size range A（thin wire）0.04-0.2mm B（ thick wire）0.1-0.35mm Loop diameter 70mm Max wire distance 9.99mm Winder speed A：0-9000turn/min B：0-5200turn/min Winder width 60mm Spindle pitch 85mm Input power 220V 50HZ/60HZ Spindle motor Phase Motor+ AC Drivers Winder motor Stepping motor Machine size 1080*800*1600mm Package size 1180*960*1130mm Net weight 198kg Gross weight 250kg

Function and feature： Automatic winding, peeling，adjustable length. Using AC Drivers control, stable performance. It also can tightly winding ,sparse winding, left-handed, right-handed . Application range： All kinds of hollow coil(Air coil).

Machine Feature: This machine design of 32 bit chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as: Bearing of Japan(NSK、NTN),Bando belt of Japan，GATES belt of Japan，Ball screw of Taiwan(TBI)，Transducers of Taiwan,and so on. Function and feature： The machine use cabinet models, thicker casting table plate, with powerful gear motor and chain super torque combinations design, moving tail stock support, with a thick wire for winding structure, It’s easy to winding the thick wire for big transformer. Application range: For a variety of big transformers,special coils , welding coils and so on.