Products / Services : Jiangyin City KeWei Plastic Co., Ltd.

Product Name£º3D Projection Screen Film Product Item No. KW003 Fire Resistant YES Mildew Proof YES Cleanable YES Anti-static YES Viewing Angle 80¡ã(L&R40¡ã) Gain 2 Suitable temperature -20¡ã +60¡ã Product structure PVC film Available width 2.5m/3.2m/3.66m Thickness 0.32mm¡À0.02mm General Recommendations: ¡ñ Cleaning with soapy water is sufficient . Do not use powder or abrasive paste.We advise that you test any cleaning agent on a small area first . ¡ñ Radio Frequency welding : Optimization needed depending on machine .When welding the joins ,should be made using the same side of the roll(right to right and left to left .) ¡ñ Digital printing and spray coating with solvent inks : Depends upon the type of machine and the nature of the ink .We always recommend preliminary testing prior to full production running . ¡ñ After unrolling : For a good lay flat ,cut panels should be allowed to relax for 24 hours and then should be trimmed square. ¡ñ Storage & Handling : We recommend indoor storage (no sunlight) at room temperature(max.23¡æ),storage time less than six months after production date.Film should be stored at room temperature (max.23¡æ,min.24h ) before processing.

Product Name£ºMatt White Glass Fiber Projection Screen Fabric Product Item No. KW006 Unit reference standard Base fabric Fiberglass Fabric Weight 560(¡À20)gsm Tensile Load Meridional ¡Ý2000 N/5cm DIN53354 Zonal N/5cm Tear Load Meridional ¡Ý70 N/5cm DIN53363 Zonal ¡Ý100 N/5cm Peel off Strength Meridional ¡Ý38 N/5cm DIN53357 Zonal N/5cm Fire Resistant YES Mildew Proof YES Cleanable YES Anti static YES Viewing Angle 100¡ã(L&R50¡ã) Gain 1.1 Suitable temperature -20¡ã +60¡ã Product structure PVC film+Glass Fiber+PVC film Available width 1.85m/2.15m/2.5m/3.05m/3.20m Thickness 0.42mm¡À0.02mm General Recommendations: ¡ñ Cleaning with soapy water is sufficient . Do not use powder or abrasive paste.We advise that you test any cleaning agent on a small area first . ¡ñ Radio Frequency welding : Optimization needed depending on machine .When welding the joins ,should be made using the same side of the roll(right to right and left to left .) ¡ñ Digital printing and spray coating with solvent inks : Depends upon the type of machine and the nature of the ink .We always recommend preliminary testing prior to full production running . ¡ñ After unrolling : For a good lay flat ,cut panels should be allowed to relax for 24 hours and then should be trimmed square. ¡ñ Storage & Handling : We recommend indoor storage (no sunlight) at room temperature(max.23¡æ),storage time less than six months after production date.Film should be stored at room temperature (max.23¡æ,min.24h ) before processing.

Product Name£ºBlack-white Projection Screen Film Product Item No. KW001 Fire Resistant YES Mildew Proof YES Cleanable YES Anti-static YES Viewing Angle 100¡ã(L&R50¡ã) Gain 1.1 Suitable temperature -20¡ã +60¡ã Product structure Black PVC film+White PVC film Available width 2.2m/2.8m/3.2m Thickness 0.32mm¡À0.02mm General Recommendations: ¡ñ Cleaning with soapy water is sufficient . Do not use powder or abrasive paste.We advise that you test any cleaning agent on a small area first . ¡ñ Radio Frequency welding : Optimization needed depending on machine .When welding the joins ,should be made using the same side of the roll(right to right and left to left .) ¡ñ Digital printing and spray coating with solvent inks : Depends upon the type of machine and the nature of the ink .We always recommend preliminary testing prior to full production running . ¡ñ After unrolling : For a good lay flat ,cut panels should be allowed to relax for 24 hours and then should be trimmed square. ¡ñ Storage & Handling : We recommend indoor storage (no sunlight) at room temperature(max.23¡æ),storage time less than six months after production date.Film should be stored at room temperature (max.23¡æ,min.24h ) before processing.

Product Item No. KW018 Unit reference standard Base fabric Fiberglass Fabric Weight 520(¡À20)gsm Tensile Load Meridional ¡Ý2000 N/5cm DIN53354 Zonal N/5cm Tear Load Meridional ¡Ý70 N/5cm DIN53363 Zonal ¡Ý100 N/5cm Peel off Strength Meridional ¡Ý38 N/5cm DIN53357 Zonal N/5cm Fire Resistant YES Mildew Proof YES Cleanable YES Anti-static YES Viewing Angle 80¡ã(L&R40¡ã) Gain 1.82.0 Suitable temperature -20¡ã +60¡ã Product structure 3D PVC film+Glass Fiber+PVC film Available width 1.85m/2.15m/2.5m/2.8m/3.20m Thickness 0.42mm¡À0.02mm

Product Name£ºPVC Laminated Polyester Fabric Product Item No. KW450 Unit reference standard Weight 450 g/m2 also can produce as your request Base fabric Polyester 1000D*1000D (also can produce as your request ) Threads 18*18( also can produce as your request ) Tensile Strength L ¡Ý2500 N/5cm GB/T3923.1-1997 W ¡Ý2300 N/5cm Tearing Strength L ¡Ý270 N/5cm GB/T3917.3-1997 W \"¡Ý250 \" N/5cm Peeling Strength \"¡Ý110 \" Color Fastness ¡Ý5 Suitable temperature -20¡ã +60¡ã Product structure PVC Film+Polyester Fabric+PVC Film Width 1.02 - 3.20m Antistatic YES Note:Colour can been customizable, If customers have special needs, according to the contract. Application: It is mainly applied to Inflatable Water toys,Inflatable Boats ,Inflastable castle , Inflatable Tent,Inflatable Pool ,sports halls, membrane structures, recreational facilities, compartment awning fabrics, military tents, housing constructions, rain protection and sun shading, artificial pools, cork hoops, canoeing, etc. and has the characteristics of light weight, high strength, fire resistance, cold resistance, aging resistance, high softening property, bright color, high color fastness, long service life, etc.

Product Name£ºGrey-black Projection Screen Film Product Item No. KW002 Fire Resistant YES Mildew Proof YES Cleanable YES Anti-static YES Viewing Angle 100¡ã(L&R50¡ã) Gain 1.1 Suitable temperature -20¡ã +60¡ã Product structure Black PVC film+Gray PVC film Available width 2.2m/2.5m/2.8m/3.2m Thickness 0.32mm¡À0.02mm General Recommendations: ¡ñ Cleaning with soapy water is sufficient . Do not use powder or abrasive paste.We advise that you test any cleaning agent on a small area first . ¡ñ Radio Frequency welding : Optimization needed depending on machine .When welding the joins ,should be made using the same side of the roll(right to right and left to left .) ¡ñ Digital printing and spray coating with solvent inks : Depends upon the type of machine and the nature of the ink .We always recommend preliminary testing prior to full production running . ¡ñ After unrolling : For a good lay flat ,cut panels should be allowed to relax for 24 hours and then should be trimmed square. ¡ñ Storage & Handling : We recommend indoor storage (no sunlight) at room temperature(max.23¡æ),storage time less than six months after production date.Film should be stored at room temperature (max.23¡æ,min.24h ) before processing.

Product Name£ºBlackout PVC Laminated Fiberglass Curtain Fabric Product Item No. KWPF-7628 Unit reference standard Base fabric 7628 Fiber Glass fabric Weight 610 g/m2 ¡À10g Tensile Load Meridional ¡Ý2000 N/5cm DIN53354 Zonal N/5cm Tear Load Meridional ¡Ý80 N/5cm DIN53363 Zonal ¡Ý100 N/5cm Peel off Strength Meridional ¡Ý15 N/5cm DIN53357 Zonal N/5cm Mildew Proof YES Antistatic YES Fire Proof YES Color Can produce as your request Suitable temperature -20¡ã +60¡ã Product structure 1ply PVC Film +1ply Blackout PVC Film +1ply Fiber Glass Fabric+1ply PVC Film Width 1.05m3.2m Thickness 0.42mm¡À0.02mm Note: If customers have special needs, according to the contract. Application: It has the characteristics of light shade ,heat insulation,environmental friendliness, flaming resistance, mould and bacteria prevention, static resistance, high flatness, etc. As an innovative product in textile industry, it fills the domestic blank and has become one of emerging fabrics for interior decoration. It is mainly for export and is widely applied to foreign and domestic high-grade hotels, high-grade office buildings, offices and high-grade residential areas, etc.

Product Name£º5M Ultra-wide Projection Screen Fabric Product Item No. KW007 Unit reference standard Base fabric 1000*1000D Polyester Fiber Weight 750(¡À20) g/m2 Tensile Load Meridional 750 N/5cm DIN53354 Zonal N/5cm Tear Load Meridional 200 N/5cm DIN53363 Zonal N/5cm Peel off Strength Meridional 40 N/5cm DIN53357 Zonal N/5cm Fire Resistant YES Mildew Proof YES Cleanable YES Anti static YES Viewing Angle 100¡ã(L&R50¡ã) Gain 1.1 Suitable temperature -20¡ã +60¡ã Product structure PVC film+ 1000D Polyester Fiber+PVC film Available width 5.1m Thickness 0.72mm¡À0.02mm General Recommendations: ¡ñ Cleaning with soapy water is sufficient . Do not use powder or abrasive paste.We advise that you test any cleaning agent on a small area first . ¡ñ Radio Frequency welding : Optimization needed depending on machine .When welding the joins ,should be made using the same side of the roll(right to right and left to left .) ¡ñ Digital printing and spray coating with solvent inks : Depends upon the type of machine and the nature of the ink .We always recommend preliminary testing prior to full production running . ¡ñ After unrolling : For a good lay flat ,cut panels should be allowed to relax for 24 hours and then should be trimmed square. ¡ñ Storage & Handling : We recommend indoor storage (no sunlight) at room temperature(max.23¡æ),storage time less than six months after production date.Film should be stored at room temperature (max.23¡æ,min.24h ) before processing.

Product Name£º300D Matt White Woven Projection Screen Fabric Product Item No. KW005 Base fabric 300*300D Polyester Fibre Weight 500(¡À20)gsm Fire Resistant YES Mildew Proof YES Cleanable YES Anti static YES Viewing Angle 100¡ã(L&R50¡ã) Gain 1.1 Suitable temperature -20¡ã +60¡ã Product structure PVC film+ Polyester Fiber+ PVC film Roll Available width 1.85m3.2m Thickness 0.45mm¡À0.02mm General Recommendations: ¡ñ Cleaning with soapy water is sufficient . Do not use powder or abrasive paste.We advise that you test any cleaning agent on a small area first . ¡ñ Radio Frequency welding : Optimization needed depending on machine .When welding the joins ,should be made using the same side of the roll(right to right and left to left .) ¡ñ Digital printing and spray coating with solvent inks : Depends upon the type of machine and the nature of the ink .We always recommend preliminary testing prior to full production running . ¡ñ After unrolling : For a good lay flat ,cut panels should be allowed to relax for 24 hours and then should be trimmed square. ¡ñ Storage & Handling : We recommend indoor storage (no sunlight) at room temperature(max.23¡æ),storage time less than six months after production date.Film should be stored at room temperature (max.23¡æ,min.24h ) before processing.

Product Name£ºMatt White Warp Knitted Projection Screen Fabric Product Item No. KW004 Unit reference standard Base fabric Warp knitting Polyester Mesh Weight 410 g/m2 Tensile Load Meridional 450 N/5cm DIN53354 Zonal N/5cm Tear Load Meridional 150 N/5cm DIN53363 Zonal N/5cm Peel off Strength Meridional 40 N/5cm DIN53357 Zonal N/5cm Fire Resistant YES Mildew Proof YES Cleanable YES Anti static YES Viewing Angle 100¡ã(L&R50¡ã) Gain 1.1 Suitable temperature -20¡ã +60¡ã Product structure White PVC film+Warp knitting Fiber+PVC film Available width 1.85m3.20m Thickness 0.38mm¡À0.02mm General Recommendations: ¡ñ Cleaning with soapy water is sufficient . Do not use powder or abrasive paste.We advise that you test any cleaning agent on a small area first . ¡ñ Radio Frequency welding : Optimization needed depending on machine .When welding the joins ,should be made using the same side of the roll(right to right and left to left .) ¡ñ Digital printing and spray coating with solvent inks : Depends upon the type of machine and the nature of the ink .We always recommend preliminary testing prior to full production running . ¡ñ After unrolling : For a good lay flat ,cut panels should be allowed to relax for 24 hours and then should be trimmed square. ¡ñ Storage & Handling : We recommend indoor storage (no sunlight) at room temperature(max.23¡æ),storage time less than six months after production date.Film should be stored at room temperature (max.23¡æ,min.24h ) before processing.

Product Name£º300D Matt Gray Woven Projection Screen Fabric Product Item No. KW005G Base fabric 300*300D Polyester Fabric Weight 500(¡À20)gsm Fire Resistant YES Mildew Proof YES Cleanable YES Anti static YES Viewing Angle 100¡ã(L&R50¡ã) Gain 0.8 Suitable temperature -20 +60¡ã Product structure Gray PVC film+Polyester Fiber+ PVC film Roll Available width 1.85m3.2m Thickness 0.45mm¡À0.02mm General Recommendations: ¡ñ Cleaning with soapy water is sufficient . Do not use powder or abrasive paste.We advise that you test any cleaning agent on a small area first . ¡ñ Radio Frequency welding : Optimization needed depending on machine .When welding the joins ,should be made using the same side of the roll(right to right and left to left .) ¡ñ Digital printing and spray coating with solvent inks : Depends upon the type of machine and the nature of the ink .We always recommend preliminary testing prior to full production running . ¡ñ After unrolling : For a good lay flat ,cut panels should be allowed to relax for 24 hours and then should be trimmed square. ¡ñ Storage & Handling : We recommend indoor storage (no sunlight) at room temperature(max.23¡æ),storage time less than six months after production date.Film should be stored at room temperature (max.23¡æ,min.24h ) before processing.