Products / Services : Cangzhou Oubeiruike Instrument Equipment Co., Ltd

Model NLD-3 cement costar mixture fluid checking instrument & Flow Table Apparatus & cement paste fluidity apparatus,Cement mortar fluidity Testing Equipment, Cement mortar fluidity Testing Equipment, Motorized Flow Table With Counter The instrument is according with the new standard JC/958-2005. It is use for cement mortar mixture fluid test. A specimen contained in a cone mould is placed on a metal surface which is then raised & dropped from a known height after releasing the specimen from the mould. Technical parameters: 1. Total weight of pulsatile part:4.35kg�0.15kg 2. Fall distance:10mm�0.2mm 3. Vibrating frequency:1/S 4. Work cycle:25times 5. Net weight:21kg

Platform vibrator for concrete;Vibrating Table. It is used for molding of test sample of concrete and mortar in the testing laboratory. Technical parameters: 1,Power�F380V�1100W 2,Table size�F500x500mm,800�800 mm�A1000mmX1000mm> 3,Amplitude�F(Full amplitude) <0.5mm> 4,Frequency of vibration�F50HZ 5,Quantity of molding testing samples�F1503 mould 6 piece 1003 (three gang)mould 3 piece

Riffle Box Used for the rapid preparation of dry material such as cement, gravel, sand, soil etc. Material poured into the hopper is divided into two equal portions by a series of slot that discharge the material alternately in opposite direction into separate pans. Standard:EN 932-1, ASTM C136, BS 812, AASHTO T27 / T87 Technical Specifications: Model Sloth Width Sloth No. Receiving container Dimension (LxWxH) Weight NO.1 � inch / 6.3 mm 12 3 nos. 193 x 133 x 142 mm 1.5 kg NO.2 3/8 inch / 9.5 mm 12 3 nos. 265 x 107 x 175 mm 3 kg NO.3 � inch / 12.7 mm 12 3 nos. 266 x 161 x 176 mm 3 kg NO.4 � inch / 19.0 mm 12 3 nos. 400 x 214 x 263 mm 7 kg NO.5 1 inch / 25.4 mm 12 3 nos. 340 x 243 x 295 mm 7 kg NO.6 1� inch / 38.0 mm 8 3 nos. 483 x 286 x 390 mm 15 kg NO.7 2 inch / 50.8 mm 8 3 nos. 573 x 286 x 390 mm 18 kg NO.8 2� inch / 63.5 mm 8 3 nos. 653 x 380 x 430 mm 20 kg

Pavement material strength measuring device Purpose:Used to measure unconfined compressive strength of soil testing sample,bearing ratio of soil to materials of road surface , thermal stability of asphalt mix and its plastic nature resistance and liquidity-stability and flow value. Technical parameters: Maximum load:100kn Lift distance:200mm Lift velocity:50mm/min 1mm/min Manual velocity:0.17mm/round Power of motor:380V750w

BH-10(20) Auto mixture mixer machine is widely used in laboratories such as scientific research, production, collegess and universities, construction, supervision. Technical parameters: 1,Volume of mixing: 10L(20L) Two types 2,Range of temperature for the heating pan: Room temperature250��(Adjustable) 3,Accuracy of temperature control:�}3�� 4,Time for mixing: 1999S(Adjustable) 5,Revolving speed of mixing fans:�FRevolution 48r/min Rotation 78r /min 6,Mains voltage: 220V3500/5500W

Model Ca-5 cement dissociative calcium oxide quick tester;cement calcium oxide tester. Dissociative calcium oxide is the main target fo scale cement quality and white lime heating.The instrument adopts glycol extract benzyl acid with titration method. Check the dissociative calcium oxide quickly only need 3minutes. It is fit for manufacture cement of concrete factory,science and research department, or teaching of junior college. Technical parameters: 1. Electrical machinery:STEPLESS SPEED REGULATION 2. Veracity:standard deviation is 0.064% 3. Extract times:3min 4. Power supply voltage:220v 50Hz 5. Power:300W 6. Average speed of temperature�s rising:60/min

Cube mould for concrete hardened testing.Material is cast iron.Machined surface finished by flat grinding machine.No distortion during specimen preparation and the specification according to EN12390 and BS1881 standard. 100*100*100 concrete Cube mould 150*150*150 concrete Cube mould Skype=chinesemoulds(at)hotmail(dot)com WeChat=503839708 Q=2652023298

Model LD-50 Ray determine apparatus;Cement Redwood clamp meter Accord with state standard GB 1346-89 to test the ray clamp quality and cement invariability. Technical parameters: 1. Adopt two same ruler scale precision is 0.5mm 2. Special poise:300g�0.5g 3. Net weight :about 1.7kg

SYD-3536 Cleveland flash-point and burning-point apparatus & Cleveland Flash & Burning Point Apparatus is applicable for determining measurement of flash-points and burning-points of petroleum products (the Cleveland open cup method) except petroleum products with flash-points and burning-points lower than 79�� according to China�fs national standard GB/T3536, ISO2592, ASTMD92 and IP36. Technical parameters: 1,Automatic ignition 2,Heating power of electric furnace: 400W 3,Controlled silicon for temperature adjustment 4,Continuous temperature adjustment

HHS-1 recycler for chlorylene extracted from asphalt.with centrifugal separation method for asphalt mixture of asphalt content determination, must use trichloroethylene as solution extraction for asphalt mixture. Technical parameters: 1,Mains voltage: 220V 2,Range of temperature control: 86100�� 3,Heating power: 800W 4,Solution input: 15005500ml 5,Means of condensation: Intermittent water circulation

ZSY-1 Electric meter display low tender degrees is Used for testing the asphalt waterproof coiled material under prescribed conditions�Caround the regulation rod bending the lowest temperature and free of cracks. Technical parameters: 1, power supply: 220 v 2, the input power: 90 w 3, test rate: 360 + 40 m/min 4, test temperature: - 40-100 (arbitrary adjustable) 5, the number of specimens: 5 pieces 6 and specimen size: 150 * 25 mm 7, time Settings: 0 and 9999 minutes (adjustable) 8, curved crankshaft : 30, 20, 50

Model SM-500 Cement experiment with refined, Hammer Crusher, Cement test ball mill, Cement clinker Grinding machine Purpose��To grind cement clinker and other material in the laboratory. The Hammer Crusher (hammer mill) crushes by the collisions between high-speed hammer and materials, and the hammer crusher(hammer mill) features are in its simple structure, high reduction ration, high efficiency, etc. The Hammer Crusher (hammer mill) were developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries Operating principle of Hammer Crusher: The motor drives the rotor rotates of the Hammer Crusher at a high speed through the belt, and on the rotor there are series hammers. When the materials get into the working area of hammers, they are crushed by the rotating hammers of the hammer crusher with high rotation speed, the products which are crushed to meet the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushed area by the hammers of the hammer crusher for being recrushed until they reached the required size. Technical parameters 1.Inside dia. of barrel and length: 500��500mm 2.Grinding mediums: 100kg 3.Material size: <7mm 4.Loading capacity: ��5kg 5.Barrel speed: ��48r/min 6.Grinding time: ��30min

Model DKZ-5000 electric bending resistant testing machine The cement electric bending resistant testing machine is the necessary device to conduct test on strength of bending resistant in the cement mortar .The device can also be used to test the bending resistant strength of other cements and nonmetal fragile material. Technical parameters: 1. Large electric load:11.7Mpa 5000N 2. The rate of loading in : 0.117�}0.0117Mpa 50�}5N/S 3. The error of indication: ��1%�ithe first grade of accuracy�j 4. The variation of indication: ��1% 5. The central distance of cylinder in the stirring stick: 100�}0.1mm 6. The diameter of cylinder in the stirring stick: 10�}0.1mm 7. The unevenness of cylinder between two stirring sticks: ��0.1mm 8. The off-centering of upper and down fixture: ��1mm

Cement Negative Pressure Mesh Analysis Device Application�FMainly used for the determination of various types of cement in a certain negative pressure through a sieve sieve allowance, to determine the fineness of cement particles. Technical parameters:�F Sieve mesh�F80um Sieving Analysis Time�F2min Negative pressure�F4000�6000Pa Power�F220V �750W

Cement sample bucket ,Special cement sample barrels, cement sample barrel is corrosion resistance of the cement sample best holding capacity of the cylinder, this container is synthesized from metal stamping forming, welding galvanized material with high strength and deformation, good corrosion resistance and appearance characteristics of a novel, for highway, railway, water conservancy, construction, construction units, tertiary institutions and other departments. The main specifications: 20 x 25 mm

GZQ-1 Full Automatic Pneumatic Consolidometer Application�� The Full Automatic Pneumatic Consolidometer is used to determine compression performance of the soil under the conditions of different load and confining pressure. The complete set of the apparatus consists of consolidomenter, pneumatic controller, multichannel communication converterand data acquisition system. It can make an experiment on standard consolidating and quick consolidation test an well as testing consolidating compression and coefficient. The performance of the apparatus is stable and reliable. This apparatus is new model with some features such as low noise, separately control consolidation compression compression, consolidating compression to be set separately, easy to lnstall software system and easy to operate etc. Capacity��0KN-4.8KN Load accuracy�� ��100KPa��absolute error ���ܡ�1.0KPa ��100KPa-1600KPa��relative error ���ܡ�1.0% Specimen area�� 30cm2��50cm2 Pneumatic control range�� 0MPa-0.9MPa Pressure transducer�� 0MPa-1.0MPa Converter channel�� 1-16 Power supply��220V��10% 50Hz Dimension��Consolidometer��450X230X280mm��L W H�� Weight��50Kg

HMP-150 Concrete flat grinding machine used for concrete core sample smooth. Technical parameters�F 1,Can grind core samples�F��50�A75�A100�A150mm 2,Grinding core sample height�F47.5-215mm 3,Power�F220V�A2500W

DLC-5 centrifugation bitumen extractor & Centrifuge Extractor Apparatus used for asphalt content testing for asphalt with mixing materials (centrifugation separation) and road surfaces by heating paving to assess quality of mixing and product. The extractor complies with the standard JTG E20-2011 issued by Ministry of Communications. Technical parameters: 1,Mains: 220V�10% 2,Power of motor: 370W550W 3,Regulating range: Automatic frequency conversion More than 3000r/min 4,Maximum weight of sample: 1500g 3000g Two types

cube mould,cylinder Mould, Prism Mould. It is build up by four parts 45 degree wall, save time to assamble or reassamble,we may regard two connect wall as one wall ,only want to disjoin two parts together,it�s more like two parts mould. Machined surface finished by flat grinding machine. Material : cast iron 100*100*100 Cast iron cube mould weight(kg)9 150*150*150 Cast iron cube mould weight(kg)16 Skype=chinesemoulds(at)hotmail(dot)com WeChat=503839708 Q=2652023298

ZSY-6 Rubber grinding machine Purpose: grinding machine for rubber factory and scientific research units abrading rubber piece to a certain thickness for other test equipment to test. Is one of indispensable equipment in the test of rubber quality work. Technical parameters�F Linear velocity of grinding wheel�F12m/s Grinding wheel specifications�FG60APRI170*40*32 36 grain G60APRI170*40*32 80 grain Working dimension�FDiameter:160mm*44mm�CHeight of center:214mm Work round trip�F20 mm Gripped sample size�FLength>260mm Width:Max.36 mm Thickness:Max.�F8 mm

150mm Steel Cube Mould : 4-part with clamp attached base plate. Cube mould for concrete hardened testing. Machined surface finished by flat grinding machine. No distortion during specimen preparation. Material :steel. weight(Kg)12.5 Skype=chinesemoulds(at)hotmail(dot)com WeChat=503839708 Q=2652023298

LXBP-5 Road flatness tester is used for check and acceptance of roads or assessment of highway conditions, measuring flatness of the road and assessing the project quality. Technical parameters: Minimum turning diameter:��5m Testing velocity��12Km/h Pulling speed under non-testing velocity:��25Km/h Environmental temperature for operation: -10��40�� Power supply: Alkaline accumulator of nickel-cadmium

The FBT-9 type full-automatic tester of specific surface area;Specific surface area analyser. According to the new standard of GB/T8074-2008, together with national building materials research institution, new materia is institution, and quality supervision, examination and test center for instrument and equipment, our company has developed new FBT-9 type full-automatic tester for specific area. The tester is controlled by single-chip microcomputer And operated by light touch key. The tester can automatically mange the whole measuring process and automatically record the value of tester.The product can display directly the value of specific area and record the value and test time automatically. Technical parameters: 1.Power supply:220V��10% 2.Range of timing:0.1-999.9 seconds 3.The precision of timing:��0.2senconds 4.The precision of measurement:��1�� 5.The range of temperature:8-34�� 6.The value of specific surface area:0.1-9999.9cm��/g 7.Scope of application: within the specified scope of GB/T8074-2008

Vibration compaction machine Purpose: this test method is applicable to the vibration compaction method forming stable inorganic binder aggregate of all kinds of specimens, including for the unconfined compressive strength test, indirect tensile strength and compressive modulus of resilience of cylinder specimen and used for temperature shrinkage coefficient, dry shrinkage coefficient, strength and flexural elastic modulus turned back, the beam specimen of the test. Technical parameters�F Static pressure�F1900N�}10%(adjustable) Vibration force�F6800N-6900N�iadjustable�j vibrational frequency�F28-30HZ The cylinder specimen mold Steel mold�Fdia�F152mm�Ch�F170mm�CWall thickness�F10mm Steel thimble�Fdia�F152mm�Ch�F50mm�CWall thickness�F10mm Beam specimen mold�F Steel side panel�FL�F450mm�CW�F180mm�Cthickness�F150mm GangDian block�FL�F450mm�CW�F100mm�Cthickness�F25mm

SYD-2806E fully-automatic asphalt softening point device & Softening Point Apparatus. Used for determining of the softening point of bituminous material,and used to measure the temperature when the asphalt falls 25mm from the original point under specified conditions Technical parameters: 1,Accuracy of temperature measurement:�}0.1�� 2,Range of temperature measurement: 5��90�� 3,Rate of temperature increase: 5.0��/min�}0.5�� 4,Subsidence distance: 25.4mm 5,Diameter of steel ball: 9.53mm 6,Weight of steel ball: 3.5�}0.05g 7,Mains voltage: 220V800W

Digital display type/pointer type slurry consistency instrument Purpose: used to determine the mixture ratio and construction process control mortar consistency, in order to achieve the control of water. Technical parameters�F Sink into the deep�F0-14.5cm Sink to the volume�F0-229.3cm Digital display scale range�F0-150mm

modle BM-III Skid resistance and friction tester;Pendulum Skid Tester; pendulum instrument. coefficient of friction pendulum tester (hereinafter referred to as pendulum instrument) is a kind of determination of pavement, airport runway, marking paint and so on friction coefficient of the instrument. Product Description: . Used to test skid resistance on existing road surfaces, 2. Consisting of a pendulum arm, rotating about a spindle attached to a vertical pillar and mounted on a trianglar base with adjustable feeet. This method provides a measure of the skid resistance properties of a surface either in the field or in the laboratory. This method measures the skid resistance of a small area of a surface (approximately 0.01 m2) and this should be considered when deciding its applicability to a pavement surface which may have variable surface characteristics, e. G. Block paving. This apparatus is used for the skid resistance measurement of asphalt pavement and concrete pavement, in order to evaluate the skid resistance of pavement in moist condition. Technical parameter�F Put the weight�F1500g Place the center of gravity of�F410mm Rubber piece of pavement is static pressure�F22.2N The end from the place of the rubber feet�F508mm On the road surface sliding length�F126mm

TM-�U Concrete Cylinder Compressometer-Extensometer Concrete Elastic moulds Meter Elastic moulds of concrete Compressometer Apparatus It is used for determining the axial deformation and diametrical extension of concrete cylinder specimens during the compression test. Complete with 2x0.001 mm dial gauge and wooden box.It is used to determine the strain and deformation characteristics of concrete and cylindrical specimens. It is comprises two lightweight metal castings for clamping to the specimens, two length gauge bars, a dial gauge 5 mm travel x 0.001 mm divisions. Compressometer for cylinder dia. 150 x 300, 160 x 320 mm. and 6�h x 12�h. Technical parameters�F 1,Size of specimen�F150�150�300mm�A100�100�300mm 2,Measuring range of dial gauge �F01mm 3,Central distance between upper and lower clamping rings�F150mm 4,The ring from the bottom of the distance�F75mm

Three gang moulds & three Gang Mould For Prisms Cement Steel 40mm Three Gang Cube Mould, for prisms 40 x 40 x 160mm is made of steel, base is made of cast iron. It is used for concrete hardened testing. Material is steel. Machined surface finished by flat grinding machine. It conforms to be above mentioned standard. The mould is used for casting specimens of cement aggregate combinations for measuring the potential expansive alkali reactivity.The effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base plate and stainless steel or brass smooth reference pins. 40*40*160 three Gang Mould For Prisms Weight(kg)6 Skype=chinesemoulds(at)hotmail(dot)com WeChat=503839708 Q=2652023298

LWD-5 Stability device for asphalt with mixing materials is applicable for Marshall stability test and soaking Marshall stability, construction quality inspection for matching ratio of asphalt with mixing materials or asphalt road surface. LCD display is employed to display the curve and experimental data, clear and convenient. Nominated pressure and flow ��#118alue by digital controller without manual adjustment for the POT; equipped with automatic protection under over voltage. The tester may not be damaged by over voltage. Technical parameters: 1,Pressure: Measuring range: 0-50KN�GDisplay unit: 0.01KN(10N) 2,Flow ��#118alue: Measuring range: 0-10.00mm(Actual ��#118alue reaches 15.00mm) 3,Operating voltage: 220V370W 4,Printer: 16p Micro-printer or LQ300K24 Pins