Products / Services : Suntech

FEATURES: 1). End of Fabric Roll Automatic Stop Sensor - for Next Roll Joining This will allow for continuous fabric inspection, from one peice of roll to next. 2). Full Width Fabric Inspection - with 60 Degree Fixed Angle Inspection Screen Fabric can be checked under the aid of different viewing and lighting options. 3). Accurate Fabric Length and Optional Weighing Machine Fabric roll length and weight can be taken by industrial standard measuring systems with digital readouts to give consistent fabric roll assessments. 4). Accurate Fabric Edge Controlling Edge alignment photo-sensor for perfect roll generation. 5). Consistent Roll Output - with Twin Rewinding Roller and Roll Hardness Adjustment Processed rolls are rewound with the correct amount of tension and are consistent from roll to roll. 6). Versatile Fabric Input and Output Options - Synchronize with Other Production Operations Optional systems are available for different fabric input and output presentations, roll to roll, continuous fabric input, etc. 7). Selvedge Shifting Device - Optional Ideal for for Thick/Sulzer Selvedges. 8). Data Collection and Analysis System (4-point System) - Optional 100% fabric inspection with software for accurate fabric roll analysis and printout. 9). Automatic Linear Cut (Fabric Roll End Cutter) - Optional Full width cutting at the end of processed roll, fast and accurate.

ST-TFRM TUBULAR FABRIC REVERSING MACHINE Has both model ST-TFRM-400 and ST-TFRM-500. This machine is specially designed for turning the cylindric shape pure fabrics inside out before they are ready to be dyed and does not cause any damage to the after dyeing.

1) . Fabric rolling drawer, with upper delivery mode lessen fabric tension and more convenient for inspection. 2) . The inspecting speed controlled by inverter as requirement. 3) . High voltage Dispenser for lightening system. This special device provides electricity Power to the Fabric Checking Box wireless. 4) . Multi-size inspecting lightening cabinets from width 18\"48\" for requirements of various fabric. This special Box installed Magnetic Block in the bottom to suspension automatically against the roller to eliminate crease marks to fabric. 5) . Two modes of fabric layout - rolling or plaiting for option 6) . Easy Operation Pannel Only few push buttons to run the machine smoothly. 7) . Remote Foot Pedal for convenient operation

1) . Low Tension Fabric Delivery and Speed Synchronization Unique mechanical and electric device combination for making fabric feeding, delivering and re-winding synchronous. 2) . Full Width Fabric Inspection - with 45 Degree Fixed Angle Inspection Screen Fabric can be checked under the aid of different viewing and lighting options. 3) . Accurate Fabric Length and Optional Weighing Machine Fabric roll length and weight can be taken by industrial standard measuring systems with digital readouts to give consistent fabric roll assessments. 4) . Stretch Fabric Control - with Scroll Roller System and De-curling System Fabric controlled from input to electro/ pneumatic edge guilding system for perfect roll generation. 5) . Consistent Roll Output - with Twin Rewinding Roller and Roll Hardness Adjustment Processed rolls are rewound with the minimum amount of tension and are consistent from roll to roll. 6) . Versatile Fabric Input and Output Options - Synchronize with Other Production Operations Optional systems are available for different fabric input and output presentations, roll to roll, continuous fabric input and plait input and output. 7) . Pneumatic Roll Ejection Device - Optional Heavy produced rolls can be pushed by the pneumatic cylinder arms so as to save labour power. 8) . Data Collection and Analysis System ( 4-point System) - Optional 100% fabric inspection with software for accurate fabric roll analysis and printout. 9) . Automatic Linear Cut ( Fabric Roll End Cutter) - Optional Full width cutting at the end of processed roll, fast and accurate.

1.Heavy duty trolley for carrying bottom warp beam on loom. 2.Both side handle bars for turning, pushing, and pulling the trolley for transport. 3.Suitble for beam flanges of dia 800 mm to 1250 mm. 4.Beam lifting movements by hydraulic hand pump for easy operations. 5.Warp beam barrel resting on two solid arms provided at both sides.

1) . Zig-zag Serrated Blade Durable alloy steel zig-zag serrated blade for attractive blades. 2) . Long Life Cutting Mat A cutting mat is included for preventing the blade from damage during the cutting operation. 3) . Scaled Cutting Table Cutting table is scaled on one side to allow the operator to decide the size of cut conveniently and accurately.

1) . Doubling, lapping, measuring any type of fabrics with inlet from plait/ loose fabrics, rolls or batchers and with outlet on slabs/ card board. 2) . For proper folding, special systems for thin and sensitive fabrics. 3) . Automatic alignment of selvedge on the doubling triangle with very sensitive and precise photo-electric guide. 4) . Reliable measuring with electronic calibrated counter meter system. 5) . Hard or loose folding feature, due to torque controlled, from inlet of fabric to end of fabrics on slab/ card board. 6) . Foot switch is used to withdraw the finished fabrics and send the empty sword plate. 7) . Automatic printing on selvedge, checking table, printing of measuring - Optional

1.Single warp beam carrying trolley suitable for 1900 3900mm wide looms. 2.Four synchronous PU type wheels with swivel suspension bearings for smooth transport on rough surface floor. 3.One end of the machine is fitted with hydraulic unit & hand pump which is connected to two hydraulic cylinders on both side of trolley. Both side handle bars are provided with swivel block & bearings for turning, pushing and pulling the trolley for transport. 4.Two solid steel fork shaped lifting arms are fitted on hexagonal lifting shaft which are movable and adjustable as per beam barrel length and can be firmly locked once adjusted.

1) . Direct Centre Drive System & Surface Contact Peripheral Drive Roller with Pneumatically Controlled Arm \" A\" frame fabric is unwound from non-contact centre drive system and wound by peripheral drive roller with pneumatically controlled arm, especially ideal for checking delicate or heavy duty fabrics. 2) . Fabric Input, Output Synchronized- for Tensionless Roll Up Speed is controlled by an adjustable light accumulation rollers for automatic fabric synchronisation. 3) . Full Width Fabric Inspection - with 60 Degree Fixed Angle Inspection Screen Fabric can be checked under the aid of different viewing and lighting options. 4) . Accurate Fabric Length Measuring Fabric roll length can be taken by industrial standard measuring systems with digital readouts to give consistent fabric roll assessments. 5) . Stable Running & Easy Operation The whole machine is controlled by PLC and the machine can be easily operated with optional Touch Screen. 6) . Simple Fabric Control With Bow/ Banana Roller to eliminate fabric creasing and roll distortions. 7) . Stretch Fabric Control - with Scroll Roller System and Optional De-curling System Fabric control at all times to generate consistent roll width and edge output. 8) . Versatile Fabric Input and Output Options - Synchronize with Other Production Operations Optional systems are available for different fabric input and output presentations, continuous fabric input and plait input or output. 9) . Data Collection and Analysis System ( 4-point System) - Optional 100% fabric inspection with software for accurate fabric roll analysis and printout. 10) . Sampling - Optional Fabric sample can be taken by automatic linear cutter and the rest fabric can be stitched by automatic sewing machine for on going checking.

1) . Doubling, sewing, plaiting any type of fabrics with inlet from plait/ loose fabrics, rolls or batchers. 2) . For proper folding, special systems for thin and sensitive fabrics as well as fabrics with curled edges. 3) . PLC controlled for synchronized operation. 4) . Automatic alignment of selvedge on the doubling triangle with very sensitive and precise photo-electric guide. 5) . Sewing carriage with Auto-Search of the fabric-edge. 6) . System of motorized drawing to avoid harmful skids for the seam. 7) . Reliable measuring with electronic calibrated counter meter system.

1) . End of Fabric Roll Automatic Stop Sensor - for Next Roll Joining This will allow for continuous fabric inspection, from one peice of roll to next. 2) . Full Width Fabric Inspection - with 60 Degree Fixed Angle Inspection Screen Fabric can be checked under the aid of different viewing and lighting options. 3) . Accurate Fabric Length Fabric roll length can be taken by industrial standard measuring systems with digital readouts to give consistent fabric roll assessments. 4) . Versatile Fabric Input and Output Options - Synchronize with Other Production Operations Optional systems are available for different fabric input and output presentations, roll to roll, continuous fabric input, etc. 5) . Data Collection and Analysis System ( 4-point System) - Optional 100% fabric inspection with software for accurate fabric roll analysis and printout.