Products / Services : ANHUI ELITE INDUSTRIAL CO., LTD

1,Introduction: EltMembrane-LG series of geomembrane is manufactured from Low Density Polyethylene resins. The products are manufactured by the technology of coextrusion-blown triple layer. Performance of these product meet or exceed GRI-GM17 standard. 2,Feature As a new generation of geotextile impermeable material, LDPE geomembrane mainly polyethylene, ethylene, ethylene polymerization polymers and other materials, which absorb a flexible geomembrane on the basis of the past, but also adds to its good extensibility, the ability to adapt to deformation. Greatly increasing the capacity of its water seepage. 3,Application: (1)Prevent leakage disposal in landfill or waste water or waste dregs disposing field. (2)River bank, lake dam, mine remainings, reservoir, tunnel. Liquid storage pool(pit, mine) (3)Preventing leakage in subway, basement, tunnel, hole. Anti-salt leskage in roadbed and other groundsill. (4)The plane direction laying of dam, the vertical direction laying for groundsill, used in the construction fence and waste material field. (5)Used in seawater of freshwater feed field (6)Used in groundsill of road, highway, railway and waterproof layer of swelling clay and wet collapsed loess. (7)Preventing leakage on rooftop Mainly as below : aquaculture ponds,Ouchi root barrier membrane,Floating baffles ,Process wastewater,Stormwater impoundments,Secondary containment,Spill containment,Manure and biogas tanks and covers ,Potable water tanks and covers,Sludge Drying beds,Bioremediation covers & liners,Leachate ponds

1,Introduction GCL is a new geosynthetics. It is graded by a natural sodium bentonite particles and corresponding additive mixed together, By special technology and equipment, the bentonite particles between two layers of geotextile fixed, made ​​of waterproof blanket, with all the characteristics of both the geotextile material, but also has excellent water (infiltration) performance. 2,Feature (1) A permanent waterproof performance, and excellent water seepage performance, impermeability hydrostatic pressure up to 1.0MPa above, permeability coefficient 5 *10-9cm / s. Because the Department of Natural sodium bentonite inorganic materials, even after a long time or the surrounding environment changes, aging or corrosion does not occur. (2) Has all the characteristics of geotextile material, such as separation, reinforcement, protection, filtration, simple construction and unrestricted construction environment temperature below 0 0 C also be construction. Just when construction GCL waterproof blanket tile on the floor, when the elevation or slope construction, with nails and washers to secure it, as required, can overlap. (3) Easy to repair; Even after water (seepage) end of construction, such as waterproof layer accident damage, as long as the site of the damage to be a simple fix, can ever regain perfect waterproof performance. (4)green: Bentonite is a natural inorganic material, harmless, non-toxic, no particular impact on the environment, with good environmental performance. (5) simple construction period is short: and other waterproof materials, the construction is relatively simple, does not require heating and paste. Product width up to 6 meters, with international geotextile (film) to match the size, greatly improving the efficiency of construction. (6) Integrated waterproof materials and objects: When sodium bentonite water, with 20-28 times the capacity expansion, even if the concrete structure vibration and settlement, bentonite GCL can repair cracks in the concrete surface less than 2mm. 3,Application (1)Municipal engineering, underground engineering subways, buildings and roofs reservoir seepage. (2)Environmental sanitation, solid waste landfills, sewage treatment plants, industrial waste. (3)water, rivers, lakes and reservoirs dam seepage, plugging, reinforcement. (4)Garden artificial lake golf course pond seepage and so on. (5)Petrochemical, mining and other areas of engineering seepage, leakage, etc.

1,Introduction Polyvinyl alcohol fiber with high strength and high modulus polyvinyl alcohol (PVA) as the main raw material, made by wet spinning process. The product has a high modulus, high strength, low elongation, pollution-free, non-toxic, and with acid, alkali, salt, abrasion, sunlight, corrosion, enzymes borers, cracking, anti-penetration, anti-UV, anti-aging properties. The products and cement with good adhesion can effectively prevent small cracks caused by the plastic shrinkage, Applicable to a variety of reinforcing materials, widely used in industrial and civil buildings walls, roof, floor and roads, bridges, tunnels, slope reinforcement. Because of the unique properties of PVA fibers, engineering, construction applications has a broad development prospects, it is an ideal replacement of asbestos completely new products. 2,Feature (1) having good mechanical properties, high strength, high modulus, low elongation. (2) acid and alkali resistance, chemical resistance. (3) Light resistance: In the long sunshine, low loss fiber strength. (4) Corrosion resistance: fiber buried underground for a long time does not mildew, rot, no insects. (5) fibers have good dispersibility: no fiber adhesion, and good dispersion in water. (6) fiber and cement, plastics and other affinity, high adhesion strength. (7) non-toxic to humans and the environment. 3,Application (1) high strength and high modulus polyvinyl alcohol fiber is an excellent substitute for asbestos fibers and glass fibers. (2) polyvinyl alcohol fiber cement products are widely used in construction, such as fiber cement boards, tiles, pipes and so on. (3) high strength and high modulus PVA fiber tow in water conservancy construction, instead of steel as reinforcement belt. (4) high strength and high modulus PVA fiber can also be used for advanced road construction, airport runways, tunnels, bridges and other construction. (5) the production of high strength rope, safety net. (6) rubber tires with reinforced material for conveyor belts, fire hoses, hoses and other preparation. (7) plastic reinforcements.

1,Introduction The product is developed for steel fibers and alternative products, compared with steel fibers easily dispersed, easy construction, no damage to the mixing equipment and other characteristics. Crude fiber based polymer polypropylene as raw material, processed through the special drawing parallel and twisted linked molding process and surface treatment, Has a high breaking strength, good dispersion in concrete, the advantages of strong bond can be used to replace steel fiber reinforced concrete cracking. 2,Applying Instruction (1)Ration design of the fibre concrete: Generally the recommended amount to add to the concrete is more than 2.7kg per sqm ( volume ratio is 0.3% ), reinforcement adding amount is 5.5kg, Compared with adding 47kg of steel fibre, 5.4kg polymer fibre has the same volume ratio to the concrete. (2) length: 50mm or 54mm for common crack-resistant requirement. (3)Matching Ratio: Usually, it is no need to Change the matching ratio of the concrete. Considering the requirement of fissure-resistant, the polymer fiber is recommend to combine with the polypropylene fiber mesh with the volume ratio of 1:1 ( 0.9kg fiber-mesh per sqm of cement concrete). (4) Mixer Adoption: Double-axle horizontal compelling mixer is priority.