Products / Services : Gaurav Enterprises1

We Manufacture & Supply of Best Quality Foam Mixer for CLC Light weight Block Manufacturing. This is available inbuilt water discharging system and digital weighing scale system and the body of the mixer is built up with high gauge steel. Apart from this the shaft and other parts is made from alloy steel to bare high impacts and loads. Features: • Sturdy Design • Low Maintenance -Trouble free Operation • Easy working • High gauge steel body • Reverse and forward mixing • Inbuilt digital weighing scale • Special type High Torque Gear boxes • Special Design suitable for CLC Foam concrete Capacity Available: • 0.6m3 • 1.5m3 • 2m3

Specifications: Machine massif dimension (H/L/W): 2000*2000*1950mm Or machine size depends on mold cover size Size of total mold block (L/W/H): 1200*1200*625 or 850mm Material required: only fly ash cement blocks can be cut Actual Output: 8 to 10 hours or depend on casting Operating Mode: Automatic Operating time for Machine : 3 to 5 min Operating staff: 3 to 5 persons Description of block cutting: Block cube cutting size depends on mold cover size. Cube is cut from top to bottom direction. Actual output depends on casting time and strength of machine depends on gear box capacity.

Operating Principal : Two or More rotating rollers gradually compress a tube forcing liquid through the tube just ahead of each roller. The tube shape back to its original shape after rollers pass so it can more liquid again . The liquid is transferred intact without damaging fragile components in its liquid stream. so it can handle any high viscous liquid Advantages : No Seal, No valve, Self Priming, Can Run Dry without Damage, Time Saving, Fuel Saving, Energy Saving, Minimum Shear, No Noise, No leakage, No Mechanical Seal, No Maintenance .

Foaming Agent: Foam-producing substance used in the manufacture of cellular concrete. Foaming agent used to make the light concrete or foam concrete. First it is to diluted in water and then foam is produced in a concrete foam generator with compressed air. Foam produced has very fine and stable high quality foam.

Air compressor: We are supplying Air compressor for clc blocks. Motor: 3HP, 5HP With dual stage. Tank Capacity: 200 ltrs.

We are manufacturers of specially designed Foam Generator for foam concrete production. These are widely used for making foam for Light- weight concrete using of the available foaming agents in the market. Specification: • 1HP single phase motor • Foam out put 300-400 lts/min • Automatic time setting to off the motor • Digital foam generator • Foam lancing unit • Daily take 100 cubic meters with our foam generator

We are manufacturers of specially designed foam generator for foam concrete production foam generator, foam concrete mixers foaming agent, clc mould, electrical panel, air compressor, conveyor belt, foam concrete pump etc.

We are engaged in offering a high quality range of CLC Mould that is widely used to form bricks and blocks. Specifications: Mould (M.S. Plate) Size: 6ft x 2ft Thickness of Mould: 3.5mm Size in MM Size in Inches No. Of Block in one m3 600 x 200 x 100mm 24 x 8 x 4 83 600 x 200 x 150mm 24 x 8 x 6 55 600 x 200 x 200mm 24 x 8 x 8 41 600 x 200 x 225mm 24 x 8 x 9 36

Which is widely used for transporting various crushed material from one to another place. Screw conveyors can be operated with the flow of material inclined upward. When space allows, this is a very economical method of elevating and conveying. As the angle of inclination increases, the capacity of a given unit rapidly decreases. Specifications: Capacity: 25 TPH Dia: 168mm Length: 5 Mtr Inclination (Max): 45 Power: 5.5kw

apacity 500 Ltr/ Hrs 1000 Ltr/ Hrs Working Pressure (Max) 7 kg/Cm2 10.54 Kg/Cm2 Efficiency 74 + 2% 55 Electric Supply AC; 3 Phase; 415+5% 50Hz+5%; 4 Wire Heating Surface Area 11.7M2 38.5m2 Approx Overall size 1500mm (L) 2000mm (W) 2000mm (H) 3200 (L) 2500 (W) 2500 (H) Water Holding Capacity 3.58 m3 Furnace Volume 2.06 m3 Steam Space 0.88 m3

We are engaged in offering a high quality range of CLC Mould that is widely used to form bricks and blocks. It is designed in compliance with international standards utilizing the best class raw materials under the guidance of skilled professionals. To meet the varied needs of the clients, we offer this CLC Mould in diverse sizes. The offered assortment is widely known for its compact design, precise dimensions, corrosion resistance, light weight, good strength and optimum durability. Size: • 600 x 200 x 100mm • 600 x 200 x 150mm • 600 x 200 x 200mm • 600 x 200 x 225mm

Two or More rotating rollers gradually compress a tube forcing liquid through the tube just ahead of each roller. The tube shape We offer Trolley i.e. Transport Trolley and Material Trolley that are used to carry material such as bricks, sand aggregate from one place to another.