Products / Services : Wu Zhou Power Tools Factory

Duct Rodders applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the FRP perforator with ease passes the narrow channel. perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm ,can resist the adverse circumstance). It has time-saving reducing effort, improving efficiency, etc ,And can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put. when use draws out the FPR pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe; When arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable. Fiberglass duct rodder features&benefits: 1. strong non-conductive fiberglass rod construction 2. stainless steel drawing head 3. for longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Specifications 1.Fiberglass hose is lightweight and non-conductive, Because of the extreme flexibility, it can be used as push-pull rodder . 2.Fiberglass push pull,Fiber snake duct rodder,cable rods 3.Fiberglass hose is lightweight and non-conductive, because of the extreme flexibility, it can be used as push-pull rodder in cable installation, and in conduit which makes it very versatile Property value Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. Material Fiberglass (inner) and high density polytgtkebe(outer) Density >1.9gr/cm3 Working temperature - 40 to + 80 Minimum pulling strength 4000 N¡À5% Tensile Modulus >46.500Mpa Consistency of rod 137gr/m Flexural Modulus >46.500Mpa Elongation at Break 2.5-3% Min. Bending Radius 388m Tensile Strength >15N/mm2 Environmental Stress & Crack Resistance >1000hr

Duct Rodders applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the FRP perforator with ease passes the narrow channel. perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm ,can resist the adverse circumstance). It has time-saving reducing effort, improving efficiency, etc ,And can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put. when use draws out the FPR pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe; When arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable. Fiberglass duct rodder features&benefits: 1. strong non-conductive fiberglass rod construction 2. stainless steel drawing head 3. for longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Specifications 1.Fiberglass hose is lightweight and non-conductive, Because of the extreme flexibility, it can be used as push-pull rodder . 2.Fiberglass push pull,Fiber snake duct rodder,cable rods 3.Fiberglass hose is lightweight and non-conductive, because of the extreme flexibility, it can be used as push-pull rodder in cable installation, and in conduit which makes it very versatile Property value Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. Material Fiberglass (inner) and high density polytgtkebe(outer) Density >1.9gr/cm3 Working temperature - 40 to + 80 Minimum pulling strength 4000 N¡À5% Tensile Modulus >46.500Mpa Consistency of rod 137gr/m Flexural Modulus >46.500Mpa Elongation at Break 2.5-3% Min. Bending Radius 388m Tensile Strength >15N/mm2 Environmental Stress & Crack Resistance >1000hr

Duct Rodders applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the FRP perforator with ease passes the narrow channel. perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm ,can resist the adverse circumstance). It has time-saving reducing effort, improving efficiency, etc ,And can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put. when use draws out the FPR pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe; When arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable. Fiberglass duct rodder features&benefits: 1. strong non-conductive fiberglass rod construction 2. stainless steel drawing head 3. for longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Specifications 1.Fiberglass hose is lightweight and non-conductive, Because of the extreme flexibility, it can be used as push-pull rodder . 2.Fiberglass push pull,Fiber snake duct rodder,cable rods 3.Fiberglass hose is lightweight and non-conductive, because of the extreme flexibility, it can be used as push-pull rodder in cable installation, and in conduit which makes it very versatile Property value Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. Material Fiberglass (inner) and high density polytgtkebe(outer) Density >1.9gr/cm3 Working temperature - 40 to + 80 Minimum pulling strength 4000 N¡À5% Tensile Modulus >46.500Mpa Consistency of rod 137gr/m Flexural Modulus >46.500Mpa Elongation at Break 2.5-3% Min. Bending Radius 388m Tensile Strength >15N/mm2 Environmental Stress & Crack Resistance >1000hr

Cable socks (also called cable grips ,cable stockings,pulling grips,support grips) provide a means of cable pulling into ducts, trenches .--Wu Zhou power tools Cable socks are manufactured from high tensile galvanised and stainless steel wire rope,incudes includes single eye cable socks, double eye cable socks, lace up cable socks, non-conductive cable socks and open ended cable socks,Single-head, single strand cable socks--Wu Zhou power tools Specifications 1.cable pulling grip; mesh sock grip 2.Rated Load:2 tons,3 tons 3.Suitable diameter:50-125mm Cable pulling grip; cable sock grip; cable stocking;pulling grips; Application:used for cable hauling in power line construction; Parameter:--Wu Zhou power tools

Cable socks (also called cable grips ,cable stockings,pulling grips,support grips) provide a means of cable pulling into ducts, trenches .--Wu Zhou power tools Cable socks are manufactured from high tensile galvanised and stainless steel wire rope,incudes includes single eye cable socks, double eye cable socks, lace up cable socks, non-conductive cable socks and open ended cable socks,Single-head, single strand cable socks--Wu Zhou power tools Specifications 1.cable pulling grip; mesh sock grip 2.Rated Load:2 tons,3 tons 3.Suitable diameter:50-125mm Cable pulling grip; cable sock grip; cable stocking;pulling grips; Application:used for cable hauling in power line construction; Parameter:--Wu Zhou power tools

Fiberglass duct rodder features&benefits: 1. strong non-conductive fiberglass rod construction 2. stainless steel drawing head 3. for longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Specifications 1.Fiberglass hose is lightweight and non-conductive, Because of the extreme flexibility, it can be used as push-pull rodder . 2.Fiberglass push pull,Fiber snake duct rodder,cable rods 3.Fiberglass hose is lightweight and non-conductive, because of the extreme flexibility, it can be used as push-pull rodder in cable installation, and in conduit which makes it very versatile Property value Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. Material Fiberglass (inner) and high density polytgtkebe(outer) Density >1.9gr/cm3 Working temperature - 40 to + 80 Minimum pulling strength 4000 N¡À5% Tensile Modulus >46.500Mpa Consistency of rod 137gr/m Flexural Modulus >46.500Mpa Elongation at Break 2.5-3% Min. Bending Radius 388m Tensile Strength >15N/mm2 Environmental Stress & Crack Resistance >1000hr

Cable Pusher/Cable Laying Equipment is a kinds of power cables /communication cable electrical laying machinery.--Wu zhou power tools It not only applied for traction power cable, communication cable and aerial wire, also for other tranction fields in the situation of cable duct, tunnel, direct-burried, long-distance transmisson. It has small volume light weight, strong thrust force ,easy to operate, so Iit can be used alone or coordinated with our company other conveying sets.--Wu zhou power tools Features&Benefit 1. It mainly consists of two motor, one reduction box traction head and up frame,etc. 2. Cable pusher is driven by biaxial, it make delivery force and the gravity effect respectively in the two directions of the cable,it is helpful to protect the insulation of the cable. 3, Transmission belts are made of high strength abrasion resistant rubber , make the cable force uniform, durable. 4, This machine is equipped with high and low adjustable roller, construction is extremely convenient 5, The native is low noise, reducer body temperature rise is small, and easy in maintenance.

Cable Pusher/Cable Laying Equipment is a kinds of power cables /communication cable electrical laying machinery.--Wu zhou power tools It not only applied for traction power cable, communication cable and aerial wire, also for other tranction fields in the situation of cable duct, tunnel, direct-burried, long-distance transmisson. It has small volume light weight, strong thrust force ,easy to operate, so Iit can be used alone or coordinated with our company other conveying sets.--Wu zhou power tools Features&Benefit 1. It mainly consists of two motor, one reduction box traction head and up frame,etc. 2. Cable pusher is driven by biaxial, it make delivery force and the gravity effect respectively in the two directions of the cable,it is helpful to protect the insulation of the cable. 3, Transmission belts are made of high strength abrasion resistant rubber , make the cable force uniform, durable. 4, This machine is equipped with high and low adjustable roller, construction is extremely convenient 5, The native is low noise, reducer body temperature rise is small, and easy in maintenance.

Fiberglass duct rodder features&benefits: 1. strong non-conductive fiberglass rod construction 2. stainless steel drawing head 3. for longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Specifications 1.Fiberglass hose is lightweight and non-conductive, Because of the extreme flexibility, it can be used as push-pull rodder . 2.Fiberglass push pull,Fiber snake duct rodder,cable rods 3.Fiberglass hose is lightweight and non-conductive, because of the extreme flexibility, it can be used as push-pull rodder in cable installation, and in conduit which makes it very versatile Property value Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. Material Fiberglass (inner) and high density polytgtkebe(outer) Density >1.9gr/cm3 Working temperature - 40 to + 80 Minimum pulling strength 4000 N¡À5% Tensile Modulus >46.500Mpa Consistency of rod 137gr/m Flexural Modulus >46.500Mpa Elongation at Break 2.5-3% Min. Bending Radius 388m Tensile Strength >15N/mm2 Environmental Stress & Crack Resistance >1000hr

Cable Drum Jacks,Cable Drum Handling ,Cable Handling Equipment,HYDRAULIC CABLE JACK SET,Hydraulic cable drum jack,Hydraulic lifting jacks for cable drums--Wuzhou power tools Product No.: WZCJ11 Product name: Trapezoidal and hydraulic cable drum jack Application: applied in the supporting of cable drum. With trapezoidal structure, it can be applied in different kinds of reel specification. Hydraulic lifting make it lift easily, trundles installed on the bottom make it easy to move, simple operation, secure and durable.--Wuzhou power tools Product No. Rated load Applicable drum diameter Applicable drum width Axle bar diameter Dead weight WZCJ11-3 3T ¦Õ700mm-¦Õ2100mm ¡Ü1500mm ¦Õ60mm 90kg WZCJ11-5 5T ¦Õ700mm-¦Õ2400mm ¡Ü1700mm ¦Õ76mm 130kg WZCJ11-10 10T ¦Õ700mm-¦Õ3200mm ¡Ü1800mm ¦Õ120mm 210kg

Duct Rodders applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the FRP perforator with ease passes the narrow channel. perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm ,can resist the adverse circumstance). It has time-saving reducing effort, improving efficiency, etc ,And can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put. when use draws out the FPR pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe; When arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable. Fiberglass duct rodder features&benefits: 1. strong non-conductive fiberglass rod construction 2. stainless steel drawing head 3. for longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Specifications 1.Fiberglass hose is lightweight and non-conductive, Because of the extreme flexibility, it can be used as push-pull rodder . 2.Fiberglass push pull,Fiber snake duct rodder,cable rods 3.Fiberglass hose is lightweight and non-conductive, because of the extreme flexibility, it can be used as push-pull rodder in cable installation, and in conduit which makes it very versatile Property value Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. Material Fiberglass (inner) and high density polytgtkebe(outer) Density >1.9gr/cm3 Working temperature - 40 to + 80 Minimum pulling strength 4000 N¡À5% Tensile Modulus >46.500Mpa Consistency of rod 137gr/m Flexural Modulus >46.500Mpa Elongation at Break 2.5-3% Min. Bending Radius 388m Tensile Strength >15N/mm2 Environmental Stress & Crack Resistance >1000hr

Duct Rodders applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the FRP perforator with ease passes the narrow channel. perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm ,can resist the adverse circumstance). It has time-saving reducing effort, improving efficiency, etc ,And can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put. when use draws out the FPR pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe; When arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable. Fiberglass duct rodder features&benefits: 1. strong non-conductive fiberglass rod construction 2. stainless steel drawing head 3. for longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Specifications 1.Fiberglass hose is lightweight and non-conductive, Because of the extreme flexibility, it can be used as push-pull rodder . 2.Fiberglass push pull,Fiber snake duct rodder,cable rods 3.Fiberglass hose is lightweight and non-conductive, because of the extreme flexibility, it can be used as push-pull rodder in cable installation, and in conduit which makes it very versatile Property value Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. Material Fiberglass (inner) and high density polytgtkebe(outer) Density >1.9gr/cm3 Working temperature - 40 to + 80 Minimum pulling strength 4000 N±5% Tensile Modulus >46.500Mpa Consistency of rod 137gr/m Flexural Modulus >46.500Mpa Elongation at Break 2.5-3% Min. Bending Radius 388m Tensile Strength >15N/mm2 Environmental Stress & Crack Resistance >1000hr

Cable Drum Jacks,Cable Drum Handling ,Cable Handling Equipment,HYDRAULIC CABLE JACK SET,Hydraulic cable drum jack,Hydraulic lifting jacks for cable drums--Wuzhou power tools Product No.: WZCJ11 Product name: Trapezoidal and hydraulic cable drum jack Application: applied in the supporting of cable drum. With trapezoidal structure, it can be applied in different kinds of reel specification. Hydraulic lifting make it lift easily, trundles installed on the bottom make it easy to move, simple operation, secure and durable.--Wuzhou power tools Product No. Rated load Applicable drum diameter Applicable drum width Axle bar diameter Dead weight WZCJ11-3 3T ¦Õ700mm-¦Õ2100mm ¡Ü1500mm ¦Õ60mm 90kg WZCJ11-5 5T ¦Õ700mm-¦Õ2400mm ¡Ü1700mm ¦Õ76mm 130kg WZCJ11-10 10T ¦Õ700mm-¦Õ3200mm ¡Ü1800mm ¦Õ120mm 210kg Product No.:WZCJ-10 Product name: Hydraulic cable drum jack Application: applied in the pay-off of outdoor underground cable, high altitude line stringing, indoor switchboard wiring, etc. With fixed seat during operation, the cable drum will not swing back and forth. Support high by oil pressure, simple operation, can be lifted quickly and easily. Product No. Rated load Applicable drum diameter Applicable drum width Axle bar diameter Dead weight WZCJ-10 10T ¦Õ1800mm-¦Õ2800mm ¡Ü1800mm ¦Õ120mm 210kg WZCJ-15 15T ¦Õ1800mm-¦Õ3200mm ¡Ü2200mm ¦Õ120mm 260kg WZCJ-20 20T ¦Õ1800mm-¦Õ3600mm ¡Ü2400mm ¦Õ140mm 380kg

Fiberglass duct rodder features&benefits: 1. strong non-conductive fiberglass rod construction 2. stainless steel drawing head 3. for longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Specifications 1.Fiberglass hose is lightweight and non-conductive, Because of the extreme flexibility, it can be used as push-pull rodder . 2.Fiberglass push pull,Fiber snake duct rodder,cable rods 3.Fiberglass hose is lightweight and non-conductive, because of the extreme flexibility, it can be used as push-pull rodder in cable installation, and in conduit which makes it very versatile Property value Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. Material Fiberglass (inner) and high density polytgtkebe(outer) Density >1.9gr/cm3 Working temperature - 40 to + 80 Minimum pulling strength 4000 N±5% Tensile Modulus >46.500Mpa Consistency of rod 137gr/m Flexural Modulus >46.500Mpa Elongation at Break 2.5-3% Min. Bending Radius 388m Tensile Strength >15N/mm2 Environmental Stress & Crack Resistance >1000hr