WELCOME TO : Gongda Machines China

This machine integrates washing filling and capping into one unit, can be used for different kinds of fruit juices, tea and hot drink production. With only a few parts changes, the machine can also be used for mineral water filling. The advanced micro-negative pressure filling technology is used in this machine. The filling is quick, steady and accurate. The beverage feedback system is well designed, the gas can be fed back separately, has no contact with beverage, reduce the second time pollution and oxidation.

1. Principal features The series of machine integrating washing, filling and capping into one unit, can be used for different kinds of fruit juices, tea, hot drink production. With only a few parts changed, the machine can also be used for mineral water filling. The filling is quick, steady and accurate. The beverage feedback system is well designed, the gas can be fed back separately, has no contact with beverage, reduce the second time pollution and oxidation. 2. Principal parameter Model CGF18/18/6 CGF24/24/8 CGF32/32/8 CGF40/40/10 Production capacity(b/h) 6000 10000 14000 18000 Total power(kw) 7.68 9.18 10.28 11.28

1. The main component: The machine includes frame, the electrical control system, solenoid pilot actuated value, pneumatic components, membrane filter fan, ultravidet lamp, systems back to wine components. 2. Features: This machine is specially designed for 5L pop cans. The control unit adopts Siemens small PLC for controlling the whole process. This machine can be used to finish aseptic filling in condition of sterilize by membrane filter machine and ultraviolet lamp. The machine fills the beer barrel in the way of vacuum-pumping and CO2 pressure preparation. 3. Main technical parameter Size of plate form: 960mm*800mm Height of plate form: 800mm Size of the machine: 1000mm*1300mm*1530mm Production capacity: 50-70keg per hour Pressure of the beer: 0.2-0.3Mpa Pressure of the air: 0.6-0.7 Mpa Pressure of the CO2: 0.2-0.3 Mpa Pressure of the cylinder: 0.3-0.5 Mpa Voltage of the electricity: AC220V 50HZ

Establish working routine willfully, easy to use. Operating speed stability and smooth 1. Technology parameter Washing medium: sterile water Washing time: 3s Drying time: 2s Water pressure: 0.2Mpa-0.4Mpa 2. Operation principle Conveyor belt will put needed cleaning bottles into the bottle screw, due to the bottle inputting screw and star wheel catch plate are continuously operating in-phase which will synchronously convey the needed cleaning bottles to the center transferring manipulator, and the manipulator along with the rotary table are spraying and washing the needed cleaning bottles, it will revert into the start-off state after completed, then the bottle outputting star wheel catch plate makes the cleaned bottle out, so the whole process is completed. 3. Technology specification Model CX-18 CX-12 Production capacity 3000-6000 b/h 2000-4000 b/h Bottle neck §¶50-§¶100mm §¶50-§¶100mm Bottle height 160-320mm 160-320mm Mainframe power 0.75kw 0.75kw Outer size 1600¡Á1500¡Á1700£¨mm£© 1200¡Á1100¡Á1700(mm) Machine weight 1200kg 800kg

Negative pressure filling machine is mainly used in filling of foaming liquids, such as wine, soy sauce, vinegar, pesticides, etc. Principal features: Level positioning accuracy, better than the industry standard, non-drip, tight and reliable seal. Broken bottles not filling, not spilling fluid, clean and hygiene. Automatic adapt the error of the height of bottles, frequency conversion speed regulator, soft start, soft-braking, non-rigid impact, stability and reliability working.