Products / Services : Gongda Machines China

Model: GZ06 Size of plate form: 600mm*500mm Height of the plat form: 600mm Size of the machine: 600mm*500mm*1600mm Weight: 100kg Production capacity: 300-500 bottles per hour 2. Technology specification Pressure of the beer: 0.15-0.2Mpa Pressure of the air: 0.4-0.6Mpa Pressure of the CO2: 0.15-0.2 Mpa Pressure of the cylinder: 0.3-0.4Mpa Voltage of the electricity: 220V 3. The main component: machine frame, beer storage canister, beer filling valve, vacuum system, air-drove jack-up system 4. Features: The main material is stainless steel, all the surface is polished, easy to operate and clean.

Establish working routine willfully, easy to use. Operating speed stability and smooth 1. Technology parameter Washing medium: sterile water Washing time: 3s Drying time: 2s Water pressure: 0.2Mpa-0.4Mpa 2. Operation principle Conveyor belt will put needed cleaning bottles into the bottle screw, due to the bottle inputting screw and star wheel catch plate are continuously operating in-phase which will synchronously convey the needed cleaning bottles to the center transferring manipulator, and the manipulator along with the rotary table are spraying and washing the needed cleaning bottles, it will revert into the start-off state after completed, then the bottle outputting star wheel catch plate makes the cleaned bottle out, so the whole process is completed. 3. Technology specification Model CX-18 CX-12 Production capacity 3000-6000 b/h 2000-4000 b/h Bottle neck §¶50-§¶100mm §¶50-§¶100mm Bottle height 160-320mm 160-320mm Mainframe power 0.75kw 0.75kw Outer size 1600¡Á1500¡Á1700£¨mm£© 1200¡Á1100¡Á1700(mm) Machine weight 1200kg 800kg

Scope of application: The device applies to the aluminum cans filling carbonated beverage. The filling such an cola, soft drinks, iced tea and other carbonated beverages etc.It is the ideal equipment of the small and medium-size beverage filling company. Cans capper mechanical structure, with different size of mold head, could apply to different cans and jars of capping , sealing ,safe, reliable, easy to apply to a wide range of food and beverage industry must have the ideal equipment.

1. Principal features The series of machine integrating washing, filling and capping into one unit, can be used for different kinds of fruit juices, tea, hot drink production. With only a few parts changed, the machine can also be used for mineral water filling. The filling is quick, steady and accurate. The beverage feedback system is well designed, the gas can be fed back separately, has no contact with beverage, reduce the second time pollution and oxidation. 2. Principal parameter Model CGF18/18/6 CGF24/24/8 CGF32/32/8 CGF40/40/10 Production capacity(b/h) 6000 10000 14000 18000 Total power(kw) 7.68 9.18 10.28 11.28

1. The main component: The machine includes frame, the electrical control system, solenoid pilot actuated value, pneumatic components, membrane filter fan, ultravidet lamp, systems back to wine components. 2. Features: This machine is specially designed for 5L pop cans. The control unit adopts Siemens small PLC for controlling the whole process. This machine can be used to finish aseptic filling in condition of sterilize by membrane filter machine and ultraviolet lamp. The machine fills the beer barrel in the way of vacuum-pumping and CO2 pressure preparation. 3. Main technical parameter Size of plate form: 960mm*800mm Height of plate form: 800mm Size of the machine: 1000mm*1300mm*1530mm Production capacity: 50-70keg per hour Pressure of the beer: 0.2-0.3Mpa Pressure of the air: 0.6-0.7 Mpa Pressure of the CO2: 0.2-0.3 Mpa Pressure of the cylinder: 0.3-0.5 Mpa Voltage of the electricity: AC220V 50HZ

Bottle rinsing machine is used for washing and sterilizing glass bottle in different shape before filling. It can save 20% energy compared with the conventional machine. It is easy to operate and save water

Negative pressure filling machine is mainly used in filling of foaming liquids, such as wine, soy sauce, vinegar, pesticides, etc. Principal features: Level positioning accuracy, better than the industry standard, non-drip, tight and reliable seal. Broken bottles not filling, not spilling fluid, clean and hygiene. Automatic adapt the error of the height of bottles, frequency conversion speed regulator, soft start, soft-braking, non-rigid impact, stability and reliability working.

Technical features: GD cap screwing machine series is based on the introduction, digestion and absorption of foreign advanced technology, according to Chinese technological requirements on bottled beverages, developed an advanced bottled equipment by innovation. It has an advanced structure, stable working, reliable, safe to operate, maintenance convenience, can be speed regulation, high production efficiency. They are ideal equipments for small and medium-size canned beverage factory

Principal feature The series of equipment combines the washing, filling, sealing functions on the same machine. The design of the machine is scientific and reasonable. The appearance is beautiful and the function is complete. Its operation and maintenance is convenient. High automation. The whole machine is controlled by PLC with touchi-screen as the interface between human and machine. The amount of the drinks in the drink tank can be controlled automatically. The filling and capping will be stopped automatically when there is no bottle. When bottles are cramped wrongly or when caps are not available, the machine can be stopped automatically.

This machine integrates washing filling and capping into one unit, can be used for different kinds of fruit juices, tea and hot drink production. With only a few parts changes, the machine can also be used for mineral water filling. The advanced micro-negative pressure filling technology is used in this machine. The filling is quick, steady and accurate. The beverage feedback system is well designed, the gas can be fed back separately, has no contact with beverage, reduce the second time pollution and oxidation.